Skip to main content

LMAM Messages

The table below presents OS 2200 LMAM status messages forwarded to the SAM. The messages are displayed in Operations of the Enterprise Manager following the job status.

LMAM Messages in Enterprise Manager Operation

MessageDescription
Submitted to Mam-<site-id>The job has been submitted to BIS MAM
MAM-<site-id>:<BIS-run-name>Last active BIS run name captured for job

LMAM Messages Displayed at System Console

**** LMAM **** LMAM/ <version>

Description

The LMAM program version, displayed upon console at startup.

MAM SITE <site-id> ACTIVATED

Description

The LMAM has activated MAM site-id.

LMAM INITIALIZATION COMPLETE

Description

The LMAM has properly initialized and is ready to process BIS runs.

LMAM on duty at <hh:mm> on <mm/dd/yyyy>

Description

The LMAM has started (on duty) at time on date.

Keyin <keyin> Registered for <console-mode> users

Description

The program has successfully registered the <key-word> as a console command available to users with the <console-mode> capabilities, or higher.

* INVALID REALTIME PRIORITY: <xx>

and

* ASSUMING REALTIME PRIORITY 35

Description

  • The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not between 02 and 35, inclusive).
  • The program assumes the priority of 35.

* REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx>

and

* ASSUMING REALTIME PRIORITY 35

Description

  • The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not a number between 02 and 35, inclusive).
  • The program assumes the priority of 35.
  • The <xx> field displays the invalid priority provided.

INIT ERROR STATUS = <TIP-status-code>

Description

  • The program is unable to initialize a TIP connection.
  • The <TIP-status-code> field contains the four-character TIP status code identifying the error; refer to Unisys TIP documentation for the meaning of the status code.

MAM PARAMETERS NOT AVAILABLE

Description

  • Parameters necessary to activate MAM have not been defined.
  • Use LSAMCFG/ECL to define MAM parameters.

NO BIS SITES ARE ACTIVE

Description

  • There are no MAMs active.
  • BIS jobs cannot be processed until the MAM(s) are activated with a console keyin.

** REG KEYIN ERROR, STATUS= <keyin-registration-error-code>

Description

  • The program received an error while attempting to register a console keyin reserved word.
  • The <keyin-registration-error-code> field contains the error code returned by the registration procedure; refer to Unisys documentation to identify the meaning of the error code.

* UNAUTHORIZED @@CONS KEYIN:

and

<keyin-received>

and

RECEIVED FROM: <terminal-id>

Description

  • A console keyin from an unauthorized source has been received.
  • The <keyin-data-received> field contains the keyin received.
  • The <source-of-keyin> field contains the terminal identification the keyin was received from.

JOBS EXIST FOR AN INACTIVE BIS SITE

and

Mam-<site-id> is Down

and

WILL UP MAM <site-id> TO ALLOW PROCESSING

Description

  • OpCon/xps jobs exist for a MAM that has been detected as inactive.
  • The LMAM attempts to activate the MAM.

DO AN UPMAM<site-id> TO ALLOW PROCESSING

Description

  • OpCon/xps jobs exist for a MAM that has been terminated with a console keyin.
  • The MAM must be activated with a console keyin before jobs are processed.

<Opconxps-job-id> submitted (MAM<site-id>) <hh:mm> on <mm/dd/yyyy>

Description

The OpCon/xps job has been submitted to MAM at time on date.

BIS SYSTEM NOT AVAILABLE FOR MAM-<site-id> START UP

Description

  • The LMAM detected the BIS system for the MAM is not processing.
  • The BIS must be running prior to starting MAM.

ERROR SENDING TO BATCH PORT <batchport-name>

Description

  • The LMAM received an error when attempting to submit (@SYM) a file to the identified batchport queue.
  • Most likely the batchport defined to LMAM is invalid.

LMAM JOB RECORD WRITE FAILURE

and

<TIP-FCSS-status- information >

Description

  • The LMAM attempted to write job information in the TIP file, but the write failed.
  • The <TIP-FCSS-status-information> field contains the TIP status error code. Refer to Unisys documentation for the error code meaning.
  • Most likely a problem with the TIP file definition.

LMAM ARRAY RECORD READ FAILURE

and

<TIP-FCSS-status-information>

Description

  • The LMAM encountered an error while attempting to read pointer array data from the TIP file.
  • The TIP-FCSS-status-information field contains the TIP error code. Refer to Unisys documentation for the error code meaning.

LMAM ARRAY RECORD WRITE FAILURE

and

<TIP-FCSS-status-information>

Description

  • The LMAM encountered an error while attempting to write pointer array data to the TIP file.
  • The TIP-FCSS-status-information field contains the TIP status code. Refer to Unisys documentation for the status code meaning.

JOB RECORD READ FAILURE

and

<TIP-FCSS-status-information>

Description

  • The LMAM encountered an error while attempting to read job data from the TIP file.
  • The TIP-FCSS-status-information field contains the TIP error code. Refer to Unisys documentation for the error code meaning.

CANT ESTABLISH JOB REC LOCK

Description

The LMAM is unable to lock a job record in the TIP file for exclusive use.

WILL RETRY JOB <Opconxps-job-id>

Description

  • The LMAM has submitted a job to MAM which has not yet been started.
  • The LMAM resubmits the job for starting.
  • Occurs after MAM has been detected as not operating after a job submit has occurred.

<Opconxps-job-id> CAUSED MAM TO ABORT

Description

  • The BIS run for OpCon/xps job caused MAM to abort.
  • MAM is restarted, the job is identified as "errored".

<Opconxps-job-id> IS RUNNING

Description

The MAM has identified the job as "running".

<Opconxps-job-id> HAS FINNED

Description

The MAM has identified the job as terminated successfully.

<Opconxps-job-id> HAS ERRORED

Description

The MAM has identified the job as terminated in error.

JOB EXISTS FOR A BIS SITE THAT IS NOT RESPONDING

and

WILL ATTEMPT TO UP MAM SITE <site-id>

Description

  • The MAM has stopped communicating and has been detected as not operational.
  • The LMAM attempts to activate the MAM.

MAM-<site-id> DOWNED

Description

The MAM has been intentionally terminated with a console keyin.

LMAM POST RUN JOBID NOT FOUND <Opconxps-job-id>

Description

  • The OpCon/xps job related to a pre-run job cannot be found in the TIP file.
  • Most likely a TIP file corruption.

LMAM SHUTDOWN IN PROGRESS

Description

The LMAM is in process of terminating.

LMAM off duty at <hh:mm> on <mm/dd/yyyy>

Description

The LMAM is no longer active (off duty) at time on date.