Skip to main content
Version: OpCon 22.0 (On-Prem)

Viewing, Adding, and Editing Unix Job Details

To view, add, or edit a Unix job, you must have the required privileges as defined in Required Privileges.

Viewing Unix Job Details

  1. To view a Unix job, go to Library > Master Jobs.
  2. Select a Unix job in the list.
  3. Select Edit.
  4. Expand the Task Details panel to expose its content.

Adding Unix Job Details

  1. Create the job and general info as described in Adding a Job.
  2. Expand the Task Details section.
  3. In the Machine Selection frame, select from the Machines or Machine Group drop-down list the machine where the LSAM is installed. If you wish instead to specify a machine group, then toggle the Machines switch to Machine Group then select the machine group from the drop-down list. When toggled to Machine Group, the button will appear green Green Enabled     Switch.
  4. In the General frame,
    1. Select a User Id to use when running the job.
    2. Select a Job Action.

For a Unix job, you can add the following job actions:


Editing Unix Job Details

  1. To edit Unix job details, go to Library > Master Jobs.
  2. Select a Unix job.
  3. Select Edit.
  4. Select the lock icon. The button appears gray and locked (Master Job Definition Read-only Button) when in Read-only mode and appears green and unlocked (Job Definition Admin Button) when in Admin mode.
  5. Expand the Task Details panel.
  6. In the Machine Selection frame, select from the Machines or Machine Group drop-down list the machine where the LSAM is installed. If you wish instead to specify a machine group, then toggle the Machines switch to Machine Group then select the machine group from the drop-down list. When toggled to Machine Group, the button will appear green Green Enabled Switch.
  7. In the General frame,
    1. Select a User Id to use when running the job.
    2. Select a Job Action.

For a Unix job, you can edit the following job actions:


Run Program

In the Prerun frame:

The Prerun frame is used to define the information for a prerequisite process that runs immediately before the primary job.

  1. Enable the Prerun switch Green Enabled Switch.
  2. Enter the command line detail for the prerun process. This should be the full path to the executable file on the LSAM machine to execute immediately before the job specified in the Start Image. This field permits up to 4000 characters.

In the Run frame:

The Run frame is used to define the information for running the primary job.

  1. Enter the full path and file name of the program to execute in the UNIX Start Image. This field permits up to 4000 characters.
  2. Enter any required command-line parameters. This field permits up to 4000 characters.
note

OpCon concatenates the Start Image and Parameters and inserts a space between them before sending the job to the UNIX LSAM.

  1. Enter the NICE Value to increase/decrease the priority of the job and prerun (if present). Valid values range from -20 to 20 with a default of zero (0).
note

A lower NICE Value signifies a higher priority; therefore, entering a negative number raises the priority and a positive number lowers the priority.

In the Job Output Parsing frame:

The Job Output Parsing frame is used to define the search criteria for analyzing job output that matches the defined characters (string) and will result in the defined exit code.

  1. Click the green Add button (+) to define the parsing criteria.

  2. Select the Search Operation from the drop-down list.

  3. Enter the String to Search. Wildcard characters are supported in the string. This field permits up to 255 characters.

  4. Select or enter the Exit Code.

note

Remove any defined parsing criteria by clicking the Delete button at the end of the row.

  1. Enter the Custom Application Log Path. Wildcard characters are supported for specifying multiple logs.

In the Failure Criteria frame:

The Failure Criteria frame is used to define the criteria for OpCon to determine the final status of the primary job.

  1. Select an operator then enter or select the exit code integer.

  2. Specify whether the defined criteria should be used to determine if the job Failed or Finished OK.

Defining Multiple Failure Criteria:

  1. Use the and/or field to define multiple failure criteria. This field defines the way the strings are evaluated together. You must define all "And" comparisons before the "Or" comparisons. Additionally, if the Comparison Operator on the previous group is "Equal To", then the and/or value must be set to "Or".

  2. Use the Fail on Core Dump switch to configure how the LSAM should report the status of the job when the job does or does not create a core file.

  • If the Fail on Core Dump switch is enabled Green Enabled Switch and a core dump is produced, then the job status will return a failed exit code.
  • If the Fail on Core Dump switch is enabled Green Enabled Switch and a core dump is not produced, then the job succeeds (assuming all other exit code processing is good).
note

The final exit code processing has nothing to do with whether a core dump is produced or not. It simply is a final determination of whether the program produced an acceptable job status.

Define up to five different signal failure criteria. If any signal failure criterion is TRUE when a job finishes, OpCon reports the job as Failed.

In the Environment Variables frame:

The Environment Variables frame is used to define the environment variables for the job to use.

  1. Click the green Add button (+) to define the environment variables.

  2. Enter a name in the Name field.

  3. Enter a value in the Value field. Remove any defined environment variable by clicking the Delete button at the end of the row.

  4. Click the OK button to add the name/value.

note

Click the Undo button if you wish to undo your changes for any reason.

  1. Click the Save button.

File Arrival

  1. Enter the file path and name of the file to detect in the File Name field. UNIX wildcard characters are supported in the file name (e.g., /usr/local/abc*.txt). This field permits up to 4000 characters.
  2. Specify whether or not to search the sub-directory under the specified path by utilizing the Sub-directory Search toggle switch. When enabled, the switch will appear green.
  3. Specify the time frame (Start Time and End Time) within which the file must arrive in the directory. Either manually input the time frame or utilize the input field selectors to make your selections.
  4. Specify the amount of time in seconds (Duration) that the file size must remain stable. Either manually input the number of seconds or utilize the input field selector(s) to make your selection.
  5. Select an operator then enter or select the exit code integer.
  6. Specify whether the defined criteria should be used to determine if the job Failed or Finished OK.
  7. Click the Save button.

Embedded Script

For conceptual information, refer to Embedded Scripts in the Concepts online help.

note

If you do not have the Script Privilege for the script, then you will not be able to see the task details or edit the daily job definition (the Lock button will be disabled).

In the Embedded Script frame:

The Embedded Script frame is used to associate an embedded script to run with the job.

  1. Select the script that you wish to associate with the job. The Type field will populate to show the type of script selected.

  2. Select the specific version (or revision) of the script to run for this job. The Comments field will populate with any notes provided about the script.

note

Selecting the "Latest" version means that just before the job runs, the latest version of the script will be used.

Viewing Scripts:

To view the details about a script, click the Preview button (Daily Job Definition Preview Button). Once clicked, the Script Viewer pop-up window will display information (e.g., name, description, type, version, version comment, author, created, updated) about and the contents of the selected script.

note

The Preview button will only be enabled for embedded scripts for which the user is a member of a role with privileges to view the contents. A user must be a member of a role with All Administrative Functions, All Function Privileges, View Embedded Script Contents privilege, or must be in the ocadm role to view the contents.

note

If you do not have the View Embedded Script Contents privilege, then you will not be able to see any of the script contents in Preview mode.

In the Runner frame:

The Runner frame is used to configure the run definition that is used to execute the script.

  1. Select the runner (interpreter) that will be used to run the script. The Run Command Template field will populate to show the syntax for the runner.

  2. Enter any argument(s) that you wish to pass to the script at runtime. This field permits up to 255 characters.

note

When defining the argument, keep in mind the that the equal sign (=) is a restricted character.

In the Failure Criteria frame:

The Failure Criteria frame is used to define the criteria for OpCon to determine the final status of the job.

  1. Select an operator then enter or select the exit code integer.

  2. Specify whether the defined criteria should be used to determine if the job Failed or Finished OK.

Defining Multiple Failure Criteria:

  1. Use the and/or field to define multiple failure criteria. This field defines the way the strings are evaluated together. You must define all "And" comparisons before the "Or" comparisons. Additionally, if the Comparison Operator on the previous group is "Equal To", then the and/or value must be set to "Or".

  2. Use the Fail on Core Dump switch to configure how the LSAM should report the status of the job when the job does or does not create a core file.

  • If the Fail on Core Dump switch is enabled Green Enabled     Switch and a core dump is produced, then the job status will return a failed exit code.
  • If the Fail on Core Dump switch is enabled Green Enabled     Switch and a core dump is not produced, then the job succeeds (assuming all other exit code processing is good).
note

The final exit code processing has nothing to do with whether a core dump is produced or not. It simply is a final determination of whether the program produced an acceptable job status.

Define up to five different signal failure criteria. If any signal failure criterion is TRUE when a job finishes, OpCon reports the job as Failed.

In the Environment Variables frame:

The Environment Variables frame is used to define the environment variables for the job to use.

  1. Click the green Add button (+) to define the environment variables.

  2. Enter a name in the Name field.

  3. Enter a value in the Value field. Remove any defined environment variable by clicking the Delete button at the end of the row.

  4. Click the OK button to add the name/value.

note

Click the Undo button if you wish to undo your changes for any reason.

  1. Click the Save button.

More Information

For conceptual information, refer to Unix Jobs in the Concepts online help.