Optional Components

note

All of the optional components must be enabled in the SMAServMan.ini file. For more information, refer to SMA Service Manager (SMAServMan).

SMA LDAP Monitor

The SMA LDAP Monitor (SMALDAPMon) component periodically checks the LDAP server to synchronize Lightweight Directory Access Protocol (LDAP) users with OpCon users. These users can exist in Active Directory or OpenLDAP.

note

SMA LDAP Monitor currently does not support using Organizational Units in Active Directory. Organizational Unit users must be put in a Group in order to be found and synced.

OpCon administrators can define the LDAP Group name for synchronization with OpCon as well as a default OpCon Role for new OpCon User Accounts.

SMA LDAP Monitor will look at the Group and Role in each Sync section specified in SMALDAPMon.ini and then the following action:

Exists in LDAP Group	Exists in OpCon	Member of OpCon Role	Enabled in LDAP Group*	Enabled in OpCon	Action Taken
Y	Y	Y	Y	Y	No action
Y	N	N/A	Y	N/A	User created and added to role
Y	Y	N	Y	Y	User added to role
Y	Y	Y	Y	N	User enabled in OpCon
Y	Y	Y	N	Y	User is disabled if they are not in any other mapped roles
Y	Y	Y	N	N	No action
N	Y	Y	N/A	Y	User is removed from the role and disabled
N	Y	Y	N/A	N	User is removed from the role
N	N	N/A	N/A	N/A	No action

*Enabled does not apply to OpenLDAP.

note

If multiple groups in SMA LDAP Monitor have the same name, by default, all users within those groups will be imported into OpCon and assigned to the specified role. If you only want users from one particular SMA LDAP Monitor group to be imported into OpCon, then the group name must be fully qualified in the SMALDAPMon.ini file.

The program name is SMALDAPMon.exe and it is installed with the SAM to the same directory of <Target Directory>\OpConxps\SAM\. SMALDAPMon.exe is managed by the SMA Service Manager. For more information, refer to SMA Service Manager (SMAServMan).

SMA LDAP Monitor Configuration

The SMA LDAP Monitor configuration determines basic application and logging behavior. The SMALDAPMon.ini file resides in the <Configuration Directory>\SAM\folder. The tables contain the definitions of each configuration parameter. All changes to the configuration are dynamic.

note

The Configuration Directory location is based on where you installed your programs. For more information, refer to File Locations in the Concepts online help.

Sample Configuration File

[General Settings]
DirectoryType=ADS
Host=hostname
Port=389
Domain=DC=smausa,DC=com
UserName=EncryptedAdministrator
Password=EncryptedAdministratorPassword
RefreshInterval=300
DefaultUserPassword=EncryptedDefaultUserPassword
UseDefaultUserPassword=false
UserNamePrefix=UsernamePrefix
EnableTls=false
EnableSsl=false

[Debug Options]
ArchiveDaysToKeep=10
MaximumLogFileSize=150000
TraceLevel=4

[Sync1]
Group= Administrators
Role=Role_ocadm

[Sync2]
Group=Operators
Role=Role_Operator

SMALDAPMon.ini

The SMALDAPMon.ini file contains the following major sections:

• General Settings
• Debug Options
• Sync Options

General Settings

The General Settings contain basic information for SMA LDAP Monitor processing.

General Settings	Required	Default	Dynamic	Definition
DirectoryType	Y	ADS	Y	The type of LDAP Server on the network. Valid Values: ADS, OpenLDAP
Host	Y	blank	Y	Host name or IP address of the LDAP server.
Port	Y	389	Y	Port number of the LDAP server.
Domain	N	blank	Y	Defines the distinguished name. If it is not specified, SMA LDAP Monitor will connect to the first or default distinguished name.
UserName*	Y	blank	Y	Encrypted login name for the LDAP directory. Must have permissions to connect to and query LDAP information from the network.
Password*	Y	blank	Y	Encrypted LDAP Password for the user specified in UserName.
RefreshInterval	N	60	Y	Time interval (in seconds) at which the service re-synchronizes users' accounts between the LSAP server and the OpCon database.
DefaultUserPassword*	N	blank	Y	Encrypted default password assigned to newly-created OpCon users. Note: This parameter is required only when the UseDefaultUserPassword parameter is set to True. If users specify UseDefaultUserPassword=true, but do not specify a password, then SMA LDAP Monitor will give an error in the log and exit.
UseDefaultUserPassword	N	False	N	An optional parameter that when added to the configuration file and set to True, assigns the value specified in the DefaultUserPassword parameter to newly-created OpCon users.
UserNamePrefix	N	blank	Y	Defines the text or domain name to prepend to OpCon user names with a backslash in between, e.g., UsernamePrefix\UserName. Applies to ADS only.
EnableTls	N	False	Y	TLS encryption will be used for the connection when set to True. If set to True, the EnableSsl parameter will be ignored.
Enable SSl	N	False	Y	SSL encryption will be used for the connection when set to True. If set to True, the EnableTls parameter will be ignored.

*To encrypt the password manually, use the Password Encryption Tool in the Enterprise Manager. Then, copy and paste the encrypted password for the value of this setting. For more information, refer to Encrypting Passwords in the Enterprise Manager online help. To encrypt the values using SMALDAPMon, refer to Command Line Arguments.

note

SMA LDAP Monitor passwords can be longer than 12 characters; however, the Enterprise Manager and Solution Manager have a 12-character limit for passwords. If the password is longer than 12 characters, you cannot use the SMA LDAP Monitor user name and password to log in interactively.

note

For OpenLDAP, UserName must contain the encrypted string of common name and domain name(s) separated by a comma. For example: UserName=cn=admin,dc=ldap,dc=smausa,dc=com.

Debug Options

The Debug Options configure the SMA LDAP Monitor's logging behavior.

Debug Options	Required	Default	Dynamic	Definition
ArchiveDaysToKeep	N	10	Y	Determines the number of days the archive log folders are retained. Each time it archives a log, the service checks for expired archive folders to delete.
MaximumLogFileSize	N	150000 (bytes)	Y	Defines the maximum size in bytes for each log file. Determines when the current log file is closed and a new file is started. When the file reaches this maximum size, it is "rolled over." This setting creates small, manageable log files. SMALDAPMon.log resides in the Output Directory\SAM\Log directory. When the log file reaches the maximum size, SMA LDAP Monitor archives the log file. The SAM then maintains the archive folders.Minimum Value = 10000 bytes, Maximum Value = 2147483647 bytes
TraceLevel	N	4	Y	Determines the detail of logging. Valid Entries: 0-5. 0 is off and 5 is detailed.0 = Off1 = Critical2 = Error3 = Warning4 = Information5 = Debug

Sync Options

The Sync Option contains the mapping of each LDAP group to an OpCon role. Multiple Sync Options are allowed. To use multiple syncs, name them [Sync#], where # is a numerical value.

note

SMA LDAP Monitor does not assign users in the LDAP groups or e-mail distribution groups inside the LDAP group that is being monitored. This means there is a one-to-one (1:1) correspondence between LDAP groups and OpCon roles.

Sync	Required	Default	Dynamic	Definition
Group	Y	blank	Y	Name of the LDAP group used for managing OpCon users (e.g., OpConUsers)
Role	Y	blank	Y	Name of the OpCon Role to grant to the new OpCon users added by the SMA LDAP Monitor

Command Line Arguments

The SMA LDAP Monitor supports the following arguments which should be specified with --[argument]=[value] or --[argument] [value] or -[argument] [value] except -c, --credentials, -s, --standalone and --help which do not have a value.

Argument	Required	Value
-c, --credentials	N	This parameter sets the credentials and encrypts the user name and passwords in the configuration file. The program can be run the first time only in order to complete the configuration.
-u, --user	N	This parameter is used in conjunction with -c or --credentials. It defines the user name to connect to the LDAP server.
-p, --password	N	This parameter is used in conjunction with -c or --credentials. It defines the password to connect to the LDAP server.
-d, --defaultpassword	N	This parameter is used in conjunction with -c or --credentials. It defines the OpCon user password to log in Enterprise Manager.
-i, --inifile	N	Name of the existing INI file to encrypt the credentials.
-s, --standalone	N	Runs SMALDAPMon.exe in standalone mode without SMAServMan. SMALDAPMon.exe will run once, and then the program will exit.
--help	N	Displays the help screen.

Example

The following commands will encrypt UserName, Password, and DefaultUserPassword in the existing SMALDAPMon.ini file:

SMALDAPMon.exe -c -u admin -p adminpassword -d opconxps -x ******************** -i SMALDAPMon.ini

SMALDAPMon.exe --credentials --user admin --password adminpassword --defaultpassword opconxps --inifile SMALDAPMon.ini

SMALDAPMon.exe --credentials --user=admin --password=adminpassword --defaultpassword=opconxps