Version: OpCon 26.0 (On-Prem)

Operations Machine Messages

Theme: Configure
Who Is It For? Automation Engineer, Business Analyst

What Is It?

Each agent returns different status messages while a job is running and when a job completes. The status messages described in this topic appear in the 20-character string following the OpCon job status in Schedule Operations. For a list of File transfer messages, refer to Operations File Transfer Messages.

IBM i LSAM Messages

The table below presents agent status messages forwarded to the SAM. The message descriptions are displayed in Schedule Operations in the graphical interfaces following the job status.

Status	Return Code	Meaning
0	SMA0030	Job not found
1	SMA0001	Job Description in run request is invalid
1	SMA0002	Job Queue in run request is invalid
1	SMA0003	Job Output Queue in run request is invalid
1	SMA0004(a)	User ID in run request is invalid
1	SMA0004(b)	SBMDBFCMD failed, unable to complete user authority check
1	SMA0004(c)	SBMDBFCMD failed, user not authorized to command
1	SMA0005	Current Library in run request is invalid
1	SMA0006	Job name is invalid. It should be alpha-numeric
1	SMA0007	Job subsystem name cannot be determined
1	SMA0008	Job Queue is held, job cannot run until queue is released
1	SMA0020	Pre-run image in run request is invalid
1	SMA0021	Run image in run request is blank
1	SMA0022	Run image in run request is invalid (failed IBM i CMDCHK)
1	SMA0023	Run job submission failed
1	SMA0024	Job initial library list is invalid
1	SMA0025	Unrecognized job type in OpCon job start request (TX1)
1	SMA0027	FTP job user profile or password invalid
1	SMA0028	FTP job sub-command source member file error
1	SMA0029	FTP job invalid action type
1	SMA0042	FTP job remote system name not supplied
1	SMA0044	Tracked or Queued Job start request did not include Private Data with Job ID
1	SMA0045	agent cannot find Job Tracking record for Tracked/Queued Job start request
1	SMA0052	Tracked/Queued Job already released or cancelled by IBM i Operator
1	SMA0062	OpCon transaction XML field code is invalid
1	SMA0067	SMAFT job request received with no source IP address
1	SMA0073	Job auxiliary data in XML fields is invalid, job request rejected
1	SMA0108	Operator Replay failed: Invalid script name, not on file
2	SMA0010	Maximum number of jobs in system exceeded
3	ACTIVE	Pre-run job is active, response to Type 2 message
3	ACTIVE HELD	Pre-run job is active but held, response to Type 2 message
3	SMA0033	Pre-run job is active
3	SMA0040	Pre-run job is active - $JOB:KILL command failed
4	SMA0034	Pre-run job error
4	SMA0096	Pre-run job already ended – job not found for Kill request
4	SMA0098	Pre-run ended by user request ($JOB:KILL)
5	MSGW-	Active job in Message Waiting status, message text follows
5	ACTIVE	Run job is active, response to Type 2 message
5	ACTIVE HELD	Run job is active but held, response to Type 2 message
5	SMA0031	Job waiting to run
5	SMA0035	Run job is active
5	SMA0041	Run job is active - $JOB:KILL command failed
6	SMA0036	Run job is complete
6	SMA0100	Operator Replay job completed OK
7	SMA0037	Run job is error
7	SMA0064	SMAFT Server get-file (IFS files) program SMAFTSR10 failed
7	SMA0064	SMAFT Server get-file (IBM i save files) program SMAFTSR20 failed
7	SMA0064	SMAFT Server get-file (DB2 files) program SMAFTSR30 failed
7	SMA0074	SMAFT Agent unable to find transfer job index master record
7	SMA0075	SMAFT Agent job did not find any transfer task definition fields
7	SMA0076	SMAFT Agent job found invalid XML field code in job parameters file
7	SMA0077	SMAFT Agent job detected a failure of the XML parser module
7	SMA0078	SMA File Transfer job failed
7	SMA0079	SMA File Transfer encryption or compression option not supported
7	SMA0080	SMA File Transfer Destination file exists and option is do not overwrite
7	SMA0081	SMAFT Agent put-file (IFS files) program SMAFTAR10 failed
7	SMA0082	SMAFT Agent put-file (IBM i save files) program SMAFTAR20 failed
7	SMA0083	SMAFT Agent put-file (DB2 files) program SMAFTAR30 failed
7	SMA0084	SMAFT: IFS file type is invalid, only type STFM (stream file) is supported
7	SMA0085	SMAFT value supplied for "If File Exists" parameter is not recognized
7	SMA0086	SMAFT Agent cancels transfer request because file exists and option is do not overwrite
7	SMA0087	SMAFT Agent failed during attempt to backup target file
7	SMA0088	SMAFT Agent detected invalid character in record separator following hex escape sequence
7	SMA0089	SMAFT Agent detected invalid character in record separator following octal escape sequence
7	SMA0090	SMAFT Agent detected invalid character in record separator following an escape character
7	SMA0091	SMAFT Agent detected invalid hexadecimal number value in record separator
7	SMA0092	SMAFT Agent detected invalid octal number value in record separator
7	SMA0093	SMAFT Agent detected invalid character number in record separator
7	SMA0094	SMAFT Agent unable to clear target file that is subject to overwrite
7	SMA0095	SMAFT Agent failed during creation of target file that did not exist
7	SMA0097	Job run command has already ended – job not found for Kill request
7	SMA0099	Run job ended by user request ($JOB:KILL)
7	SMA0101	Operator Replay failed: Telnet host not recognized (getHostByName)
7	SMA0102	Operator Replay failed: Cannot open socket to use with telnet (sock)
7	SMA0103	Operator Replay failed: Cannot connect to telnet service (connect)
7	SMA0104	Operator Replay failed: Failed to set socket attributes for telnet session (fcntl)
7	SMA0105	Operator Replay failed: Bell character received = typed (Send) value error
7	SMA0106	Operator Replay failed: Replay script timeout
7	SMA0107	Operator Replay failed: Error in script control definitions
7	SMA0109	Operator Replay failed: Script has no sequence records
7	SMA0135	SMAFT Agent failed to grant authority to new backup file in SMABAK library
7	SMA0136	SMAFT Agent detected non-numeric record length in pre-pended data before first received data record
7	SMA0137	SMAFT Agent detected non-numeric record length embedded between variable records in received data
7	SMA0138	SMAFT Agent unable to delete old backup copy of save file in SMABAK library
9	SMA0038	Job completed with no error
9	SMA0039	Job completed with status not equal 0

MCP Machine Messages

The table below presents agent status messages forwarded to the SAM and supporting services. The message descriptions are displayed in Schedule Operations in the graphical interfaces following the job status. The 20-character status description field contains a five-character area reserved for the ClearPath MCP mix number followed by a 15-character description. All TX messages referenced in the table below indicate a message sent from SMANetCom to the agent.

Message	Description
ADOPTED	Indicates a tracking request has been received by the agent.
ALREADY RUNNING	An OpCon job initiation request (TX1) was received for this job and the job is running on the ClearPath MCP.
ATTRIBUTE ERR	Assignment of task attributes was attempted on a job initiated with a RUN. One of the task attributes is erroneous. Refer to the system log for a display of the error message from the HANDLEATTRIBUTES procedure. Verify the job definition details.
COMPLETED	The job completed successfully.
COMPLETED–ADOPT	A tracked job has completed successfully.
DS	The job terminated abnormally.
DS OUT OF QUEUE	The job was DS'ed while still queued.
F DS	The job experienced a fault and was terminated abnormally.
FAIL MSG	The WFL displayed a message that matched one of the Fail Codes, causing the job to be reported as failed in Schedule Operations.
FAILED –ADOPT	A tracked job has failed. (The HISTORY task attribute indicates job finished in error.)
JJJJJ/TTTTTCOMP OK	The task completed successfully. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTDS	The task terminated abnormally. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTFAILCODE	The task displayed a message that matched one of the Fail Codes, causing the task to be reported as failed in Schedule Operations. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTF DS	The task experienced a fault and was terminated abnormally. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTO DS	The system operator terminated the task abnormally. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTP DS	The task was terminated abnormally because of a program fault. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTQ DS	The task was terminated abnormally because of an improper job queue definition or a job queue error. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTRESETCODE	The task displayed a message that matched one of the Fail Reset codes, causing the task to be reported as Finished OK in Schedule Operations. JJJJJ is the job number. TTTTT is the task number.
JJJJJ/TTTTTSNTX/SCRY	An OpCon task initiation request (TX1) was received by the agent, but the initiation attempt failed because of an invalid syntax used in the construction of the file title. JJJJJ is the job number. TTTTT is the task number.
JOB ARRAY FULL	This message is sent in response to an OpCon job initiation request (TX1). The message occurs when the number of active jobs, according to the OS handler (SMA/MCP/INTERFACE), has reached the maximum defined in the agent configuration file. OpCon attempts job initiation again.
JOB NOT ACTIVE	This message is sent in response to an OpCon job status request (TX2) or to an OpCon job completion acknowledgment (TX3). Although the job was found in the tracking file, the record is not available because the job is no longer active.
JOB NOT FOUND	This message is sent in response to an OpCon job status request (TX2) or to an OpCon job completion acknowledgment (TX3). The job was not found in the tracking file. This can be the result of any number of situations (multiple SAMs connected to a single agent, delayed delivery of a TX1 for a job on which a JOB:TRACK event was sent to SAM, etc.).
JOB Q FULL	This message is sent in response to any OpCon job initiation request (TX1) that is received when the number of active jobs, determined by the COMM Handler (SMA/COMM), has reached the maximum. The maximum number is defined in the agent configuration file. OpCon attempts job initiation again.
LSAMRESTARTING	This message is sent following a restart/recovery of the agent modules. The job was present in the agent arrays before the agent terminated. This is the initial status following an agent recovery. It is followed by a current status of the job.
MISSING OBJECT	The Details screen in the Enterprise Manager contains the RUN command, but the file named in the File Title is not present. Verify the USERCODE, FAMILY, and spelling. The usercode does not have a family assignment and the Job Details File Title does not include the family name of the program.
NO JOB TITLE	No file title was defined on the Details screen in the Enterprise Manager. Note: The PARAM/ATTR ERR message replaces NO JOB TITLE when the "Contemporary, XML" protocol is in use.
NO WFL FILE	The Details screen in the Enterprise Manager contains the START command, but the file named in the File Title is not present. Verify the user code, family, and spelling. The mix number of this status description belongs to the agent task that initiates the WFL compile. It is not the mix number for the WFL compile itself. The usercode does not have a family assignment and the Job Details File Title does not include the family name of the WFL. Note: The PARAM/ATTR ERR message replaces NO WFL FILE when the "Contemporary, XML" protocol is in use.
NOT CODE FILE	The Details screen in the Enterprise Manager contains the RUN command, but the File Title is not the name of an existing executable file.
NOT DSED	A "Kill" was requested for this job, but the job was not O-DSed. This message often occurs when the kill was attempted after the job's completion.
NOT FOUND-ARRAY	This message is sent in response to an OpCon job status request (TX2) or to an OpCon job completion acknowledgment (TX3) when an OpCon Job ID is not in the OS Handler (SMA/MCP/INTERFACE) tables.
NOT JOB FILE	The Details screen in the Enterprise Manager contains the START command, but the File Title is not the name of an existing WFL file.
NOT VALID	The job could not be located and the status is unknown. This message may be received following a restart/recovery of the agent modules. This message usually indicates the job has completed (normally or abnormally).
O DS	The system operator terminated the job abnormally.
P DS	The job was terminated abnormally because of a program fault.
PARAM/ATTR ERR	An OpCon job initiation request (TX1) was received by the agent, but the initiation attempt failed because of a parameter mismatch or invalid attribute (job name does not conform to the rules for entity names). If the START command was used, the mix number of this status description belongs to the agent task initiating the WFL compile, and not to the mix number for the WFL compile itself. A possible cause for this error is that the Details screen in the Enterprise Manager contains the START or RUN command, but the file named in the File Title is not present. Verify the USERCODE, FAMILY, and spelling.
PARAMETER ERR	The Details screen in the Enterprise Manager contains the RUN command, but a parameter is erroneous. Verify the parameter length and type.
PRERUN ACTIVE	The Prerun job is active.
PRERUN FAILED	The Prerun job failed. OpCon attempts job initiation again.
PRERUN WAITING	The Prerun job is in the waiting mix.
QUEUED	The job has been placed in a system queue. This is the first status for a WFL job that compiled successfully. When the job is released from the queue, the status changes to RUNNING.
RESTART H_ER nnn	Following a restart of the agent, the job's status could not be determined due to a GETSTATUS hard error "nnn". A description of the specific hard error may be found in the appropriate appendix of the MCP GETSTATUS/SETSTATUS Manual.
RESTART S_ER nnn	Following a restart of the agent, the job's status could not be determined due to a GETSTATUS soft error "nnn". A description of the specific soft error may be found in the appropriate appendix of the MCP GETSTATUS/SETSTATUS Manual.
RUNNING	This job is active. This message is also seen if a WFL has been DSed and is waiting for tasks to complete.
RUNNING –ADOPT	OpCon has received the tracking request and responded with a TX1 message. SMA/COMM has received the TX1 message and the job is running.
SCHEDULED	This job has been scheduled by the system. This message can be expected during periods of high processor usage.
SNTX/SECRTY ERR	An OpCon job initiation request (TX1) was received by the agent, but the initiation attempt failed because of an invalid syntax used in the construction of the file title.
TASK(S) FAILED	The job completed successfully, but one or more of the subordinate tasks within the WFL failed.
TASK FAILED JOB	The configuration option Fail Job if Task Fails has been set to Y. A subordinate task of the WFL has failed and consequently OpCon has reported the job as failed.
UNKNOWN ERROR	This message occurs when a specific reason for the job's failure could not be identified. In most cases, the WFL job has failed queue insertion. The mix number is the one most recently identified with the OpCon job. If the job has failed queue insertion, this is the mix number of the WFL compile.
USERCODE ERROR	The agent was unable to completely assume the identity (e.g., batch user privileges, family assignments, and so forth) of the usercode specified on the Details screen in the Enterprise Manager. Verify the spelling.
WAITING	The job is in the waiting mix. The mix number shown is the mix number of the waiting process, not necessarily the number of the parent WFL. This message is displayed momentarily even if Automated Response has been set up for the situation. When the task becomes active, again, a status of RUNNING is displayed.
WFL SYNTAX ERR	The WFL source file contains syntax errors. Correct the WFL source. The File Title field on the Details screen in the Enterprise Manager may contain extraneous characters, such as CR/LF, START, or RUN. The File Title field should contain only the file title of the process to be initiated; furthermore, if the job is being initiated using a RUN command, the appropriate task attributes should also be included. The WFL source file contains an "INCLUDE" statement that references a file that cannot be found. The WFL compile was DS'ed.

OS 2200 Job Messages

The table below presents OS 2200 LSAM status messages forwarded to the SAM. The messages are displayed in Schedule Operations of the graphical interfaces following the job status.

Message	Description
<run's-termination-word>	The run's condition word value at termination. Used to determine a successful or error termination.
<ST-failed-message>	The "ST" failed message returned by the Exec when an "ST" statement is rejected.
*ASSIGN FAILED ON FILE-NAME FAC=ssssssssssss	This message is displayed when SAM has repeatedly tried to assign a file that should be available. The "sss" field contains the octal facility status code used to determine the cause of the reject. This message does not stop the processing and may be encountered repeatedly until the file becomes available.
ASSUME ABORTED	Displayed when a job has been submitted to the Exec, but has never started and is not detected in backlog. The job may have errored during the start process. The agent can only assume the job aborted during startup, without ever becoming active. This message is the result of agent's RSI (DEMAND) userid not allowed @@CONS RC commands, or the DEMAND session cannot be started.
AS <runid>	Displayed once a job has started and the unique Exec Run-ID has been identified.
AWAITING ECL FILE	Displayed when a job's ECL file is exclusively assigned to another EXEC run. The job is not able to start until the agent is able to retrieve the ECL, the agent continues attempting to retrieve the file.
ECL FILE ERROR	Displayed when the ECL cannot be retrieved, often due to an empty file/element.
ECL FILE INVALID	Displayed when the ECL file identified for the job is not a valid file.
ECL NOT FOUND	Displayed when the ECL identified for the job is not found in the ECL file.
ECL READ ERROR	Displayed when a job's ECL cannot be read, often due to a corrupted ECL file/element.
FILE DEPEND NOT MET	Displayed when one or more file dependencies for the job are not satisfied.
JOB IN BACKLOG	The job has been detected in the Exec's backlog. May be due to the Exec's Batch Limit setting, or resources required by the job are not yet available.
PRERUN COMPLETED	The job's prerun has completed successfully, the actual job is started next.
RC= FINNED	Displayed when an "@@CONS RC" command for the job returns a "FINNED" response. Indicates the job terminated without providing status information to agent, or when the job fails to start, often due to an invalid account code rejected by the system console operator.
RC= NOT FOUND	Displayed when an "@@CONS RC" command for the job returns a "NOT FOUND" response. Indicates the job is no longer active, but termination status was not communicated to the agent, or when the job fails to start.
RSI RUN NOT ACTIVE	Displayed when the agent RSI (DEMAND) session is not active. This may be due to an invalid userid and password. The agent requires the job with a later start time. Investigate and correct the RSI issue to re-enable the agent to start jobs. Note: The agent attempts to use the @START command for jobs with the same ACCT/User-ID as the agent.
ST key Error - INVALID USERID	This error occurs when SECOPT1 is installed and the User ID used for starting an Exec job is invalid.
ST STMT SUBMITTED	Displayed when the "ST" (start) statement has been submitted to the Exec, but the job has not yet become active.
START CMD FAILED	Displayed when the "@START" command has failed for an unidentifiable reason.
START FILE PROBLEM	Displayed when the agent is unable to manipulate the job's tracking file. Additional information is displayed on the system console.
START STMT SUBMITTED	Displayed when the "@START" statement has been submitted to the Exec, but the job has not yet become active.
TRACKING FILE GONE	Displayed when a job terminates without providing termination status to the agent, causing the job's tracking file to be deleted. This indicates a job error termination, or an ECL issue involving the premature releasing of the tracking file.

OS 2200 LSAM Messages Displayed at System Console

The following messages are displayed by the agent at the Unisys OS 2200 system console:

Message	Description
INIT ERROR STATUS = <xxxx>	The program is unable to initialize a TIP connection. The <xxxx> field contains the four-character TIP status code identifying the error Refer to Unisys TIP documentation for the meaning of the status code.
DEMAND SESSION NOT ESTABLISHED DUE TO: MISSING OR INVALID USERID/PASSWORD	The agent is unable to start a DEMAND run due to incorrect sign-on information.
DEMAND SESSION NOT ESTABLISHED DUE TO: DEMAND QUOTA EXCEEDED	The agent is unable to start a DEMAND run due QUOTA restrictions.
DEMAND SESSION NOT ESTABLISHED DUE TO: RESOURCES NOT AVAILABLE	The agent is unable to start a DEMAND run due to lack of system resources (e.g., exceeds the number of DEMAND runs allowed).
* INVALID REALTIME PRIORITY: RAISED TO REALTIME LVL 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not between 02 and 35, inclusive). The program assumes the priority of 35.
* INVALID REALTIME PRIORITY: RAISED TO REALTIME LVL: <param-RT-level>	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not between 02 and 35, inclusive). The program assumes the priority of 35.
REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx> ASSUMING REALTIME PRIORITY 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not a number between 02 and 35, inclusive). The program assumes the priority of 35. The <xx> field displays the invalid priority provided.
agent INITIALIZATION COMPLETE	The agent has properly initialized and is ready to process batch jobs.
agent on duty at <hh:mm> ON <mm/dd/yyyy>	The agent has started (on duty) at time on date.
** REG KEYIN ERROR, STATUS= <xxxxx>	The program received an error while attempting to register a console keyin reserved word. The <xxxxx> field contains the error code returned by the registration procedure; refer to Unisys documentation to identify the meaning of the error code.
Keyin <key-word> Registered for <console-mode> users	The program has successfully registered the <key-word> as a console command available to users with the <console-mode> capabilities, or higher.
agent SHUTDOWN IN PROCESS	The agent is in process of terminating.
agent off duty at <hh:mm> ON <mm/dd/yyyy>	The agent is no longer active (off duty) at time on date.
TROUBLE <xxxx>	The program has encountered trouble while attempting to manipulate TIP file data. The <xxxx> field contains the TIP error code; refer to Unisys documentation to identify the meaning of the error code.
* UNAUTHORIZED @@CONS KEYIN: and<keyin-data-received> andRECEIVED FROM: <source-of-keyin>	A console keyin from an unauthorized source has been received. The <keyin-data-received> field contains the keyin received. The <source-of-keyin> field contains the terminal identification the keyin was received from.
agent JOB RECORD WRITE FAILURE	The agent encountered an error while attempting to write job data to the TIP file. The breakpoint file of the run contains additional error information.
agent ARRAY RECORD READ FAILURE	The agent encountered an error while attempting to read pointer array data from the TIP file. The breakpoint file of the run contains additional error information.
agent ARRAY RECORD WRITE FAILURE	The agent encountered an error while attempting to write pointer array data to the TIP file. The breakpoint file of the run contains additional error information.
<OpCon/xps-Job-ID> is currently running	The OpCon job has been started and is processing, a run-id for the job has not yet been identified.
<OpCon/xps-Job-ID> (<Exec-Run-ID>) is currently running	The OpCon job has been started and is processing with the <Exec-Run-ID>.
<OpCon/xps-Job-ID> Pre-run errored <hh:mm mm/dd/yyyy>	The Pre-run for OpCon job has errored at time date.
<OpCon/xps-Job-ID> errored <hh:mm mm/dd/yyyy>	The OpCon job has errored at time date.
<OpCon/xps-Job-ID> (<Exec-Run-ID>) errored <hh:mm mm/dd/yyyy>	The OpCon job with Exec-Run-ID errored at time date.
<OpCon/xps-Job-ID> Pre-run no status...assume aborted	The Pre-run for OpCon job has been started, but status information is not available. The agent assumes the pre-run has aborted. This is the result of the pre-run job not providing status to agent and the agent DEMAND run unable to retrieve status using the @@CONS RC command, most likely a problem with the DEMAND user-id configuration.
<OpCon/xps-Job-ID> no status...assume aborted	The OpCon job has been started, but status information is not available. The agent assumes the job has aborted. This is the result of the job not providing status to agent and the agent DEMAND run unable to retrieve status using the @@CONS RC command, most likely a problem with the DEMAND user-id configuration.
<OpCon/xps-Job-ID> (<Exec-Run-ID>) no status...assume aborted	The OpCon job, with Exec-Run-ID, has been started, but status information is not available. The agent assumes the job has aborted. This is the result the agent DEMAND run unable to retrieve status using the @@CONS RC command, most likely a problem with the DEMAND user-id configuration.
CANT ESTABLISH JOB REC LOCK	The agent is unable to lock a job record in the TIP file for exclusive use.
agent JOB RECORD WRITE FAILURE	The agent attempted to write job information in the TIP file, but the write failed. Most likely a problem with the TIP file definition.
agent ARRAY RECORD READ FAILURE	The agent attempted to read a pointer array record from the TIP file, but the read failed. Most likely TIP file corruption, a failure to properly initialize the TIP file, or a problem with the TIP file definition.
agent POST RUN JOBID NOT FOUND <OpCon/xps-Job-ID>	The OpCon job related to a pre-run job cannot be found in the TIP file. Most likely a TIP file corruption.
<OpCon/xps-Job-ID> ECL LINE TRUNCATED TO 80 CHARACTERS	The agent has detected an ECL command (beginning with @) exceeding 80 characters in length. The ECL line is truncated to 80 characters. ECL command lines longer than 80 characters (without a continuation) are invalid. Most likely a comment on the line caused it to exceed 80 characters.
<RSI-error-message-returned> and SHUT DOWN OF RSI IN PROCESS	While accessing the DEMAND run, the agent received the RSI-error-message-returned. The DEMAND run is terminated. The agent attempts to restart the DEMAND run.
<OpCon/xps-Job-ID> duplicated, running as <Exec-Run-ID>	The Exec Run-ID for OpCon job has been duplicated. The Exec has assigned Exec-Run-ID to the job.
*ST FAIL:<OpCon/xps-Job-ID> ERR=<xx> STAT=<start-error-message>	The @@CON ST command for the OpCon job failed. The ERR field contains an agent assigned error code, the STAT field contains the error message returned by the Exec in response to the ST command.
<OpCon/xps-Job-ID> (<Exec-Run-ID>) is waiting in backlog	The OpCon job, with Exec-Run-ID, has been detected in the Exec backlog. This is the result of the Exec batch limit set lower than the OpCon concurrent job limit, or facilities required by the job are not available, or a batch hold (CS H) on the system.
<OpCon/xps-Job-ID> SUBMITTED AT <hh:mm> ON <mm/dd/yyyy>	The OpCon job start command has been submitted at time on date.
<OpCon/xps-Job-ID> STARTING AS EXEC JOB <Exec-Run-ID>	The OpCon job has been assigned the Exec-Run-ID.
<OpCon/xps-Job-ID> IS A PRE-RUN JOB	The OpCon job started is a pre-run job.
<OpCon/xps-Job-ID>-NO START DATA AVAILABLE	The agent has received a start command from OpCon for a job without ECL location data.
ECL FILE NOT FOUND FOR JOB: <OpConxps-Job-ID>	The ECL file for the OpCon job cannot be found on the system. Most likely an invalid ECL location has been entered for the job.
START-FILE NOT AVAILABLE FOR JOB.....<OpConxps-Job-ID>	The agent cannot assign the ECL file for the OpCon job. The Exec has rejected the file assignment for a reason other than "not catalogued". The file may be "unloaded", or the agent is not authorized to access the file.
ECL NOT IN FILE, JOB:<OpConxps-Job-ID>	The file element is not in the ECL file identified for OpCon job. Either the element name is incorrect, or the file name is incorrect.
ECL IS EXCL ASGED BY ANOTHER RUN and RETRYING START OF <OpConxps-Job-ID>	The ECL file for OpCon job is exclusively assigned to another run. The agent continues attempting to assign the ECL file.
*START FAIL:<OpCon/xps-Job-ID> ERR=<xx> STAT=<start-error-message>	The @START command for OpCon job failed. The ERR field contains an agent assigned error code. The STAT field contains the error message.
SDFIO SYNTAX ERR: <SDFIO-data>	A syntax error has been returned by the EXEC SDF services module when agent attempted to access an ECL file. The SDFIO-data contains the information used when the error occurred.
SDFIO ASG ERR, FAC.......<facility-status>	The EXEC SDF services module returned an error while attempting to assign an ECL file. The facility-status contains the FAC error code.
agent IS UNABLE TO SIGN ON THE SYSTEM	The agent is unable to sign-on a DEMAND run. May be due to improper privileges for the agent, or system resources are not available.

OS 2200 LMAM Messages

The table below presents OS 2200 LMAM status messages forwarded to the SAM. The messages are displayed in Schedule Operations of the graphical interfaces following the job status.

Message	Description
Submitted to Mam-<site-id>	The job has been submitted to BIS MAM
MAM-<site-id>:<BIS-run-name>	Last active BIS run name captured for job

OS 2200 LMAM Messages Displayed at System Console

Message	Description
* *LMAM* LMAM/<version>	The LMAM program version, displayed upon console at startup.
MAM SITE <site-id> ACTIVATED	The LMAM has activated MAM site-id.
	The LMAM has properly initialized and is ready to process BIS runs.
LMAM on duty at <hh:mm> on <mm/dd/yyyy>	The LMAM has started (on duty) at time on date.
Keyin <keyin> Registered for <console-mode> users	The program has successfully registered the <key-word> as a console command available to users with the <console-mode> capabilities, or higher.
INVALID REALTIME PRIORITY: <xx> and ASSUMING REALTIME PRIORITY 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not between 02 and 35, inclusive). The program assumes the priority of 35.
REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx> and ASSUMING REALTIME PRIORITY 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not a number between 02 and 35, inclusive). The program assumes the priority of 35. The <xx> field displays the invalid priority provided.
INIT ERROR STATUS = <TIP-status-code>	The program is unable to initialize a TIP connection. The <TIP-status-code> field contains the four-character TIP status code identifying the error; refer to Unisys TIP documentation for the meaning of the status code.
MAM PARAMETERS NOT AVAILABLE	Parameters necessary to activate MAM have not been defined. Use LSAMCFG/ECL to define MAM parameters.
NO BIS SITES ARE ACTIVE	There are no MAMs active. BIS jobs cannot be processed until the MAM(s) are activated with a console keyin.
** REG KEYIN ERROR, STATUS= <keyin-registration-error-code>	The program received an error while attempting to register a console keyin reserved word. The <keyin-registration-error-code> field contains the error code returned by the registration procedure; refer to Unisys documentation to identify the meaning of the error code.
* UNAUTHORIZED @@CONS KEYIN: and <keyin-received> and RECEIVED FROM: <terminal-id>	A console keyin from an unauthorized source has been received. The <keyin-data-received> field contains the keyin received. The <source-of-keyin> field contains the terminal identification the keyin was received from.
JOBS EXIST FOR AN INACTIVE BIS SITE and Mam-<site-id> is Down and WILL UP MAM <site-id> TO ALLOW PROCESSING	OpCon jobs exist for a MAM that has been detected as inactive. The LMAM attempts to activate the MAM.
DO AN UPMAM<site-id> TO ALLOW PROCESSING	OpCon jobs exist for a MAM that has been terminated with a console keyin. The MAM must be activated with a console keyin before jobs are processed.
<OpConxps-job-id> submitted (MAM<site-id>) <hh:mm> on <mm/dd/yyyy>	The OpCon job has been submitted to MAM at time on date.
BIS SYSTEM NOT AVAILABLE FOR MAM-<site-id> START UP	The LMAM detected the BIS system for the MAM is not processing. The BIS must be running prior to starting MAM.
ERROR SENDING TO BATCH PORT <batchport-name>	The LMAM received an error when attempting to submit (@SYM) a file to the identified batchport queue. Most likely the batchport defined to LMAM is invalid.
LMAM JOB RECORD WRITE FAILURE and <TIP-FCSS-status- information >	The LMAM attempted to write job information in the TIP file, but the write failed. The <TIP-FCSS-status-information> field contains the TIP status error code. Refer to Unisys documentation for the error code meaning. Most likely a problem with the TIP file definition.
LMAM ARRAY RECORD READ FAILURE and <TIP-FCSS-status-information>	The LMAM encountered an error while attempting to read pointer array data from the TIP file. The TIP-FCSS-status-information field contains the TIP error code. Refer to Unisys documentation for the error code meaning.
LMAM ARRAY RECORD WRITE FAILURE And <TIP-FCSS-status-information>	The LMAM encountered an error while attempting to write pointer array data to the TIP file. The TIP-FCSS-status-information field contains the TIP status code. Refer to Unisys documentation for the status code meaning.
JOB RECORD READ FAILURE And <TIP-FCSS-status-information>	The LMAM encountered an error while attempting to read job data from the TIP file. The TIP-FCSS-status-information field contains the TIP error code. Refer to Unisys documentation for the error code meaning.
CANT ESTABLISH JOB REC LOCK	The LMAM is unable to lock a job record in the TIP file for exclusive use.
WILL RETRY JOB <OpConxps-job-id>	The LMAM has submitted a job to MAM which has not yet been started. The LMAM resubmits the job for starting. Occurs after MAM has been detected as not operating after a job submit has occurred.
<OpConxps-job-id> CAUSED MAM TO ABORT	The BIS run for OpCon job caused MAM to abort. MAM is restarted, the job is identified as "errored".
<OpConxps-job-id> IS RUNNING	The MAM has identified the job as "running".
<OpConxps-job-id> HAS FINNED	The MAM has identified the job as terminated successfully.
<OpConxps-job-id> HAS ERRORED	The MAM has identified the job as terminated in error.
JOB EXISTS FOR A BIS SITE THAT IS NOT RESPONDING and WILL ATTEMPT TO UP MAM SITE <site-id>	The MAM has stopped communicating and has been detected as not operational. The LMAM attempts to activate the MAM.
MAM-<site-id> DOWNED	The MAM has been intentionally terminated with a console keyin.
LMAM POST RUN JOBID NOT FOUND <OpConxps-job-id>	The OpCon job related to a pre-run job cannot be found in the TIP file. Most likely a TIP file corruption.
LMAM SHUTDOWN IN PROCESS	The LMAM is in process of terminating.
LMAM off duty at <hh:mm> on <mm/dd/yyyy>	The LMAM is no longer active (off duty) at time on date.

BIS Machine Messages

Message	Description
MULTIPLE MAMS STARTED - EXTRA TERMINATED	A MAM has been started while another MAM is already processing. Most likely a MAM configuration error.
501-COM FILE ERROR RET STATUS CODE = <status-code>, MAM GOING DOWN	The MAM detected an error while attempting to retrieve the LMAM communications file. The status-code field contains the RET error code. MAM terminates.
502-COM FILE ERROR -- ELT STATUS CODE = <status-code>, MAM GOING DOWN	The MAM encountered an error while attempting to ELT the LMAM communications file. The status-code field contains the ELT error code. MAM terminates.
503-COM FILE ERROR - NO CONTROL LINE, MAM GOING DOWN	The MAM has retrieved an LMAM communications file which does not contain a valid control line. MAM terminates. Most likely cause is the communications file being catalogued by a process other than LMAM.
NO COMMUNICATION WITH SAM/LMAM FOR 75 CYCLES and DOWN MAM AND UP MAM AGAIN – 183	The MAM is unable to retrieve the LMAM communications file after 75 attempts. Most likely the LMAM is unable to detect the MAM as active. Using LMAM commands to "down" and then "up" the MAM forces LMAM to start communications with MAM.
MAM-<site-id> FILE NOT AVAILABLE, STAT=<status-code> - 196	The MAM has detected the LMAM communications file is not available for retrieving. The status-code field contains the RET status received.
JOB <OpConxps-job-id> RUN <BIS-run-name> CANNOT BE STARTED	The MAM is unable to start the BIS-run-name associated with OpCon/xps-job-id. Most likely an invalid run name, or an error in the registration of run.
JOBID <OpConxps-job-id> HAS NO STATION NUMBER and JOBID <OpConxps-job-id> STATUS IS UNPREDICTABLE	The MAM is unable to identify the station number (terminal) of a background run. The station number is required for monitoring the run, the reported status may be inaccurate due to the inability to monitor the terminal.
SAM/LMAM IS DOWN - MAM IS TERMINATING	The MAM has detected that LMAM is not processing. MAM terminates. Occurs when LMAM terminates.

OS 2200 JORS Messages Displayed at System Console

Message	Description
TIP FILE NUMBER EXPECTED	The SMAJOR/ECL does not contain the TIPFILE statement after the @XQT SMAJOR statement. Indicates a corrupted SMAJOR/ECL element.
INVALID REALTIME PRIORITY: <xx> and * ASSUMING REALTIME PRIORITY 35	The program's XQT statement activated the RealTime option, but the runstream did not provide a valid priority. The <xx> field displays the invalid priority. Valid priority values range from 02 to 35. The program's priority defaults to 35.
REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx> and * ASSUMING REALTIME PRIORITY 35	The program's XQT statement activated the RealTime option, but the runstream did not provide a valid priority. The <xx> field displays the invalid priority. Valid priority values range from 02 to 35. The program's priority defaults to 35.
** REG KEYIN ERROR, STATUS= <keyin-registration-status-code>	The program received an error while attempting to register a console keyin reserved word. The <keyin-registration-status-code> field contains the error code returned by the registration procedure. Refer to Unisys documentation for the error code's meaning.
SMA JOB OUTPUT RETRIEVAL ACTIVE - hh:mm:ss.tt	The Job Output Retrieval System (JORS) is ready to accept requests.
Keyin <keyin-word> Registered for <console-mode> users	The program successfully registered the <key-word> as a console command. The command is available to users with the <console-mode> capabilities, or higher.
* UNAUTHORIZED @@CONS KEYIN: and <Keyin-received> and RECEIVED FROM: <terminal-id>	The program received a console keyin from an unauthorized source. The <keyin-received> field contains the unauthorized keyin. The <terminal-id> field contains the keyin's terminal identification.
JORS RCD READ LOCK FAILURE	The SMAJOR is unable to establish a lock on the JORS record in the TIP file. A problem with the TIP file definition is the most likely cause.
SMAJOR IS STOPPING	SMAJOR is in the process of terminating.
*SMAJOR IS TERMINATING	SMAJOR is terminating.

OS 2200 XFRTCP Messages Displayed at System Console

Message	Description
TIP FILE NUMBER EXPECTED	The XFRTCP/ECL does not contain the TIPFILE statement after the @XQT XFRTCP statement. Indicates a corrupted XFRTCP/ECL element.
INVALID REALTIME PRIORITY: <xx> and * ASSUMING REALTIME PRIORITY 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not between 02 and 35, inclusive). The program assumes the priority of 35.
REALTIME OPTION SELECTED, BUT NON-NUMERIC LEVEL: <xx> and * ASSUMING REALTIME PRIORITY 35	The RealTime option has been activated on the program's XQT statement, but the priority provided is not valid (not a number between 02 and 35, inclusive). The program assumes the priority of 35. The <xx> field displays the invalid priority provided.
** REG KEYIN ERROR, STATUS= <keyin-registration-status-code>	The program received an error while attempting to register a console keyin reserved word. The <keyin-registration-status-code> field contains the error code returned by the registration procedure. Refer to Unisys documentation to identify the meaning of the error code.
Keyin <keyin-word> Registered for <console-mode> users	The program has successfully registered the <key-word> as a console command available to users with the <console-mode> capabilities, or higher.
ATTACH TO TSAM AS TSU <TSU-name> WAS SUCCESSFUL	The XFRTCP has successfully attached to the communications software TSU process. The TSU-name field contains the name of the process.
ATTACH TO TSAM AS TSU < TSU-name> FAILED	The XFRTCP has failed to attach to the communications software TSU process. Most often related to an invalid TSU Process name or password.
OPCON COMM HANDLER (XFERIF<xx>/<version>) READY	The XFRTCP has successfully initialized and is ready for network communications.
* UNAUTHORIZED @@CONS KEYIN: and<Keyin-received> and RECEIVED FROM: <terminal-id>	A console keyin from an unauthorized source has been received. The <keyin-data-received> field contains the keyin received. The <source-of-keyin> field contains the terminal identification the keyin was received from.
SAM / NETCOM USING LEGACY PROTOCOL	The SAM/NETCOM is configured to communicate in LEGACY protocol. The configuration must be "Contemporary, Non-XML".
JOB <OpConxps-job-id> ERRORED ON <mm/dd/yyyy> AT <hh:mm:ss> and JOB <OpConxps-job-id> ECL: <qual*file.element/version>	The configuration option is set to display the job's ECL location on error terminations.
agent NO LONGER ACTIVE	The XFRTCP has detected the agent is not processing. Start the agent to resolve.
agent-LOCK FILE NOT FOUND **	The XFRTCP has detected the agent-LOCK file is not catalogued. Catalogue the <lsam-qualifier>*agent-LOCK file to resolve.
REQUESTS EXCEED OUTWARD FLOW	The XFRTCP is receiving more requests than can be processed. Most likely a network communications problem between NETCOM and XFRTCP.
CANT ESTABLISH EVENT REC LOCK	The XFRTCP is unable to establish a lock on an Event record in the TIP file. Most likely a problem with the TIP file definition.
XFRTCP IS STOPPING	XFRTCP is in the process of terminating.
*XFRTCP IS TERMINATING	XFRTCP is terminating.

SAP BW Machine Messages

To the right of the OpCon Job Status in Schedule Operations, the SAP BW agent populates a twenty-character message to communicate numeric job completion information.

For jobs that are running, the SAP BW agent returns the SAP BW Process Chain ID. The 20-character termination description in Schedule Operations displays part of the Chain ID. The complete 25 characters Chain ID displays in the Job Configuration screen
For jobs that Finish OK, the SAP BW agent returns information in the following format: 0-< Partial Process Chain ID>
For jobs that Failed, the SAP BW agent returns information in the following format: <agent Exit Code> - <SAM job number or SAP Process Chain ID>
If the agent was unable to start the SAP BW Process Chain before it failed, the message contains the SAM job number
If the agent was able to start the SAP BW Process Chain before it failed, the message contains the SAP Process Chain ID

note

The SAP BW agent returns more detailed alpha numeric error messages to the agent Error Messages parameter in the Job Configuration screen of Schedule Operations. Refer to the Configuration tab information in Job Information in the Enterprise Manager online help.

SAP BW agent Specific Exit Conditions

The following is a list of SAP BW agent exit conditions for failed jobs. If an exit condition is not in this list, the agent Exit Code position of the return status is a Windows error code (refer to Windows Machine Messages for a list of Windows exit codes).

SAP BW agent Exit Condition Number	Description
70001	Error in trying to start the BW Process Chain
70002	Error in retrieving the log for BW Process Chain

SAP R/3 and CRM Machine Messages

To the right of the OpCon Job Status in Schedule Operations, the SAP R/3 and CRM agent populates a 20-character message to communicate numeric job completion information.

For jobs that are running, the agent returns the SAP job number.

If the running job has child jobs, the agent returns the current status of the child job(s) in following the format: <Child Name> - <Current Status>

The Child Name displays up to 15 characters of the child job name
The current status contains one of the following:
- Actv: Active
- Rdy: Ready
- Int: Intercepted
- Schd: Scheduled
- Fin: Finished
- Term: Terminated
- Rel: Released

The complete child name and its current status are available in the Job Configuration screen.

For jobs that Finish OK, the agent returns information in the following format: 0-< SAP job ID>
For jobs that Failed, the agent returns information in the following format: <agent Exit Code> - <SAM or SAP job number>
- If the agent was unable to create a copy of the SAP R/3 and CRM job before it failed, the message contains the SAM job number
- If the agent was able to create a copy of the SAP R/3 and CRM job before it failed, the message contains the SAP Job number

note

The SAP R/3 and CRM agent returns more detailed alpha numeric error messages to the agent Error Messages parameter in the Job Configuration screen of Schedule Operations. Refer to the Configuration tab information in Job Information in the Enterprise Manager online help.

SAP R/3 and CRM agent-Specific Exit Conditions

The following is a list of SAP R/3 and CRM agent exit conditions for failed jobs. If an exit condition is not in this list, the agent Exit Code position of the return status is a Windows error code (refer to Windows Machine Messages for a list of Windows exit codes).

SAP R/3 and CRM agent Exit Condition Number	Description
70001	The Job Name the agent is trying to send to the SAP system is null.
70002	The Job Number the agent is trying to send to the SAP system is null.
70003	The USER setting in the SAPLSAM.ini file is blank.
70004	Error in logging on to SAP system: bad User ID, password, or TCP/IP address.
70005	Error in checking existing job status: could not find the job on the SAP system.
70006	Error in job copy: The agent could not copy the job to run it in SAP.
70007	Error in Job definition get: after the job was copied for execution, the agent couldn't retrieve the copied job's details; therefore, the job could not run.
70008	Error in starting the copied job: the job copy and job retrieve were successful, but the agent could not start the job.
70009	Error in getting the job's current status
70010	Error in reading the job log
70011	Error in getting the children job information for the current job
70012	Error in aborting job
70013	Error in reading the spool list for the job
70017	Error in starting the job immediately because no background processes were available

SAP BAPI Errors

The following table contains error numbers and descriptions of SAP BAPI Error Codes.

Message Number	Description
value 'XM'	xmi_messages
value '9'	msg_logon_gen
value '010'	msg_logon
value '011'	msg_logoff_gen
value '012'	msg_logoff
value '013'	msg_auditlevel_set
value '014'	msg_versions_get_gen
value '015'	msg_versions_get
value '016'	msg_version_check
value '017'	msg_interface_describe
value '018'	msg_logmsg_enter
value '019'	msg_log_select
value '020'	msg_message_formats_upload
value '021'	msg_already_logged_on_gen
value '022'	msg_already_logged_on
value '023'	msg_unknown_interface
value '024'	msg_unknown_version
value '025'	msg_logon_denied_gen
value '026'	msg_logon_denied
value '027'	msg_not_logged_on_gen
value '028'	msg_not_logged_on
value '029'	msg_invalid_range
value '030'	msg_cant_select
value '031'	msg_cant_log
value '032'	msg_cant_upload
value '033'	msg_invalid_parameters
value '034'	msg_problem_detected
value '035'	msg_reorg
value '037'	msg_reorg_gen
value '046'	msg_jobname_missing
value '047'	msg_jobid_missing
value '048'	msg_ext_user_missing
value '049'	msg_job_does_not_exist
value '050'	msg_progname_missing
value '051'	msg_no_archive_info
value '052'	msg_invalid_print_params
value '053'	msg_invalid_archive_params
value '054'	msg_no_release_privilege
value '055'	msg_job_not_active
value '056'	msg_no_abort_privilege
value '057'	msg_no_job_found
value '058'	msg_targethost_missing
value '059'	msg_no_jobsteps
value '060'	msg_no_job_protocol
value '061'	msg_empty_job_protocol
value '062'	msg_step_count_missing
value '063'	msg_no_spoollist
value '064'	msg_privilege_missing
value '065'	msg_invalid_spoolid
value '066'	msg_no_immediate_start_poss
value '067'	msg_no_resources_found
value '068'	msg_invalid_date_time
value '069'	msg_invalid_server_name
value '070'	msg_prog_has_no_variantv
value '071'	msg_prog_does_not_exist
value '072'	msg_no_execute_privilege
value '073'	msg_prog_not_executable
value '074'	msg_no_variants_defined
value '075'	msg_invalid_select_option
value '076'	msg_select_param_missing
value '077'	msg_trace_before_call
value '078'	msg_select_jobname_missing
value '079'	msg_select_username_missing
value '080'	msg_cant_del_in_jobtable
value '081'	msg_cant_del_joblog
value '082'	msg_problem_pred_succ
value '083'	msg_commit_failed
value '084'	msg_no_delete_privilege
value '085'	msg_job_running
value '086'	msg_interface_reorg
value '087'	msg_interface_reorg_gen
value '088'	msg_parent_child_inconsistency
value '089'	msg_child_register_error
value '090'	msg_mask_error
value '091'	msg_param_missing
value '092'	msg_event_does_not_exist
value '093'	msg_event_raise_failed
value '094'	msg_job_confirmation_failed
value '095'	msg_wrong_confirmation_type
value '096'	msg_wrong_selection_par
value '097'	msg_parentchild_inactivev
value '098'	msg_interception_inactivev
value '099'	msg_wrong_counter
value '100'	msg_wrong_printer_name
value '101'	msg_selection_finished
value '194'	msg_cant_enq_job
value '195'	msg_cant_read_jobdata
value '196'	msg_cant_release_job
value '197'	msg_cant_set_jobstatus_in_db
value '198'	msg_cant_start_job_immediately
value '199'	msg_cant_update_jobdata
value '200'	msg_eventcnt_generation_error
value '201'	msg_invalid_dialog_type
value '202'	msg_invalid_new_jobdata
value '203'	msg_invalid_new_jobstatus
value '204'	msg_invalid_startdate
value '205'	msg_job_edit_failed
value '206'	msg_job_modify_canceled
value '207'	msg_job_not_modifiable_anymore
value '208'	msg_nothing_to_do
value '209'	msg_no_batch_on_target_host
value '210'	msg_no_batch_server_found
value '211'	msg_no_batch_wp_for_jobclass
value '212'	msg_no_modify_privilege_given
value '213'	msg_no_release_privilege_given
value '214'	msg_no_startdate_no_release
value '216'	msg_invalid_targetgroup
value '217'	msg_conflicting_targets
value '218'	msg_job_doesnt_have_steps
value '219'	msg_wrong_step_type
value '220'	msg_job_doesnt_have_this_step
value '221'	msg_cannot_get_priarc_params
value '222'	msg_cannot_read_job
value '223'	msg_cannot_modify_job
value '224'	msg_wrong_step_number
value '225'	msg_error_modifying_worktable
value '227'	msg_job_nosteps
value '228'	msg_jobcount_missing
value '229'	msg_invalid_target
value '230'	msg_error_reading_worktable
value '231'	msg_delete_line_error
value '232'	msg_no_step_info
value '233'	msg_wrong_action
value '234'	msg_no_change_authority
value '235'	msg_invalid_jobclass
value '236'	msg_wrong_client

info

Source: BC-XBP 6.10 Background Scheduling Job Scheduling System WAS 6.10 (Version 2.0) Documentation. Walldorf, Germany: Systems, Applications & Products in Data Processing (SAP), 2002. http://www.sap.com/partners/icc/scenarios/technology/bc-xbp.asp/ (accessed May 21, 2004).

Tuxedo ART Job Messages

The Tuxedo ART environment provides multiple return codes from various capabilities. These include return codes from the artjesadmin utility as well as codes from the job completion. The job completion codes can be split into the three areas, as completion code, System Abend, and User Abend.

Sometimes it is possible to receive non-numeric characters in the return code. When this happens, the return code is 9999 and the original return code can be found in the job output.

Return Code	Description
0 - 9999	Job completion code (prefixed by C, e.g., C0000 -- C9999)
9999	Job completion code contained non-numeric characters, refer to job log
10000 -19999	Job completion code System Abend (prefixed by S, e.g., U0000 -- S9999)
19999	Job completion code contained non-numeric characters, refer to job log
20000 - 29999	Job completion code User Abend (prefixed by U, e.g., U0000 -- S9999)
29999	Job completion code contained non numeric characters, refer to job log
30000	artjesadmin : Job completed successfully
30001	artjesadmin : Utility command failed
30003	artjesadmin : Job failed
30004	artjesadmin : Job was cancelled
30005	artjesadmin : Job is in conversion state
30006	artjesadmin : Job is running
30007	artjesadmin : Job is queued waiting for conversion process
30008	artjesadmin : Job has been placed on hold
30009	artjesadmin : Job is queued waiting for processing to start
30010	artjesadmin : Job has been discarded
30011	artjesadmin : Execution of job is in unknown state
30022	artjesadmin : Job does not exist in Tuxedo ART environment
30099	Job initialization error

UNIX LSAM Messages

This section covers messages generated by the agent which may appear in the agent's log and/or error file. Whether informational or to report an error condition, messages begin with text generated by the agent, followed by (in parentheses):

The message ID
The system-specific error number returned by the operating system
The symbolic name for this error (common to the vast majority of UNIX systems)
A brief [system-specific] description of the error returned by the operating system

Not every message will contain all the items within the parentheses. In general, if the message was not the result of failure within a system routine, then only the message ID will be included. The system-specific error number and description varies from system to system. Moreover, a system call often has multiple failure modes; consequently, the same message ID may be followed by a variety of error codes.

Example

The following shows a Detailed agent Message which might be returned for a agent exit code of 000010205:

[sma_lsam] (monitor) - Unable to execute [/usr/john/job_1] for [JOB1] (120 / 2 [ENOENT] - No such file or directory)

In this case, the user should check what was entered for "Start Image" on the Job Details screen.

There are currently over 500 messages which might be output, making a listing of each impractical. The following table lists the messages which address conditions that can generally be understood and/or corrected by the user without intervention of Continuous Support personnel. Within the Message Text, "[x]" indicates variable data.

Once jobs are built, the Schedule Operations screen contains different information depending on a job's status. In many cases, a specific failure message is returned from the agent and viewable in the field "Detailed Job Messages" under the "General" tab of the Job Configuration screen (in Schedule Operations). When UNIX jobs are processing, the status information in Schedule Operations includes the Process ID (pid) number or any optional status messages.

note

Scripts using the sma_status utility can use the 20-character message area to display any desired text; otherwise, the PID displays in the message area. For further information, refer to sma_status in the UNIX LSAM online help.

Message Text	Explanation and/or Corrective Action
[x] multiply-defined	The indicated step [STARTING_STEP, ENDING_STEP, RESTART_STEP] was found to be included more than once. Check "Start Image" and "Parameters" in the job's Job Details screen. Note: The [x] multiply-defined message text applies only to jobs based on the [Continuous]{.GeneralCompanyName}-supplied template job script discussed in UNIX Job Details.
Invalid job step [x]	Shell variable 'next_step' set to a non-existent job Step Label as displayed. Check all settings of 'next_step' -- especially for use of incorrect letter case. Note: The Invalid job step [x] applies only to jobs based on the [Continuous]{.GeneralCompanyName}-supplied template job script discussed in UNIX Job Details
Infinite loop detected	The job experienced 'number_of_steps' iterations and was terminated. Check the following: - Starting or Restart Step comes after Ending step in script - Step gets repeated, possibly via intervening steps - Job logic correct but 'number_of_step' set too small Note: The Infinite loop detected applies only to jobs based on the [Continuous]{.GeneralCompanyName}-supplied template job script discussed in UNIX Job Details
Unable to change access for [x]	Access permissions for the indicated job stdout/dtderr output file could not be restricted per the agent Configuration setting.
Unable to change ownership for [x]	Ownership of the indicated job stdout/dtderr output file could not be changed from 'root/root' per the agent Configuration setting.
Process [x] did not start	The agent health monitor has determined that the indicated agent process did not start (or started but then immediately terminated). Stop the agent. If the cause for the lost process cannot be determined from other error messages, corrected, and the agent successfully re-started, then wait five minutes and re-start the agent. It should then start and run properly if the cause was of a momentary nature.
Process [x] has terminated	The agent health monitor has determined that the indicated agent process abnormally terminated. Stop the agent. If the cause for the lost process cannot be determined from other error messages, corrected, and the agent successfully re-started, then wait five minutes and re-start the agent. It should then start and run properly if the cause was of a momentary nature.
Sending SIGUSR1 (die) to all agent processes	The "bin/lsam\<SAM_Socket> stop" command was given; this message is confirmation that the agent is in normal termination processing.
Unable to find [x]	"[x]" cannot be located for processing.
Unable to create [x]	"[x]" cannot be created for processing.
Unable to open [x]	"[x]" cannot be opened for processing.
Unable to read [x]	Data cannot be read from "[x]".
Unable to write [x]	Data cannot be written to "[x]".
Deleting [x]	"[x]" was deleted. This is normally just an informational message, and not indicative of a problem unless "[x]" is later referenced in an "Unable to ..." message.
Unable to connect to [x]	A socket-based connection cannot be made to the indicated remote service or system. Determine if the indicated system or service is up-and-running, and/or if the network is operational, and correct the condition.
Unable to send [x1] to [x2]	A message "[x1]" cannot be sent over the socket-based connection to the indicated remote service or system ("[x2]"). Determine if the indicated system or service is up-and-running, and/or if the network is operational, and correct the condition.
agent health monitor operating	Informational message to confirm that the agent started with the agent health monitor in proper operation.
No agent health monitor	Informational message to confirm that the agent started without the agent health monitor in proper operation. Run the agent Configuration program to confirm that agent health monitoring has been disabled.
agent health monitor disabled	The agent health monitor has ceased operation. This is normal after issuance of the "agent stop" command.
Sender not allowed by the agent configuration	The portion of the agent which communicates with the SAM has received a message over a socket-based connection from an address not configured to be acceptable. The received message was ignored. It may be necessary to run the agent Configuration program to update the agent's configuration.
Received unauthorized message	Some portion of the agent has received a message over a socket-based connection from an unexpected address. The received message was ignored. It may be necessary to run the agent Configuration program to update the agent's configuration.
Received a message with a blank machine name	The portion of the agent which communicates with the SAM has received a message without the required machine name which identifies to the agent the intended recipient for the message. Mark the agent down in a graphical interface and stop the agent. Wait five minutes, then re-start the agent and mark it back up in a graphical interface.
Received a message from SAM with invalid action specified	The portion of the agent which communicates with the SAM has received a message with an invalid action specified. Mark the agent down in a graphical interface and stop the agent. Wait five minutes, then re-start the agent and mark it back up in a graphical interface.
Received a duplicate message from SAM	The agent has received a duplicate message from SAM. If this happens only occasionally, it indicates timing issues which sometimes arise in distributed processing systems like [OpCon]{.GeneralOpConGlobalName}, and is not indicative of a problem. If it happens in a series over a few minutes, it indicates an acute problem with the SAM or the intervening network hardware.
Missing environment variable [x]	The indicated UNIX shell environment variable is not defined. The variable may be either expected to be defined at the system level, or it may be an agent-defined variable which is not getting passed around as required.
Environment variable [x] is	The indicated UNIX shell not defined environment variable is not defined. The variable may be either expected to be defined at the system level, or it may be an agent-defined variable which is not getting passed around as required.
Received a SIGUSR1	Each process in the agent should output this message during normal termination of the agent. If the "bin/lsam\<SAM_Socket> stop" command was not given, then some process or user on the system issued a "kill" command on the indicated process.
Received order to stop agent Health Monitor	This message is output during normal termination processing.
[x] Operational	Each process in the agent should output this message during normal startup of the agent.
Too many arguments for [x]	The addition of the text for "Start Image" and "Parameters" in the job definition resulted in > 100 arguments. An "argument" is any text but a space. For example, the Start Image/Parameters combination "/usr/john/job x y abc123 1", the start image is "/usr/john/job", and the four arguments are "x", "y", "abc123", and "1". (It is possible to include parameters in the "Start Image" text box in the EM.)
Blank start image for [x]	The indicated job contained no start image, i.e., script or program to run. Check the Job Details screen in the EM.
Job [x] contained no UID	The indicated job had no User ID.
Job [x] contained no GID	The indicated job had no Group ID.
Job [x1] contained an invalid	The indicate User ID for the UID [x2] indicated job was either non-existent or incorrectly formatted.
Job [x1] contained an invalid	The indicate Group ID for the GID [x2] indicated job was either non-existent or incorrectly formatted.
Not allowed to start job [x]	The agent is configured to not as 'root' allow jobs to run with 'root' privileges. This can be changed by running the agent Configuration program.
Unable to access start image [x1] for [x2]	The indicated Start Image could not be run for the indicated job. The parenthesized portion of the message provides additional details, on which corrective action can be based.
Unable to run [x1] for	The indicated item could not be [x2] run for the indicated job. The parenthesized portion of the message provides additional details, on which corrective action can be based.
Unable to exec() [x1] to start	The indicated Start Image could [x2] not be run for the indicated job. The parenthesized portion of the message provides additional details, on which corrective action can be based. If the agent determines that this was caused by an invalid reference to a shell/interpreter, e.g., the first line of the job script reads, "!#/bin/bogus", an additional message will be generated to indicate this possibility.
Unable to 'cd' to $HOME for [x]	agent configuration parameter require_HOME_directory is enabled and the indicated job cannot be run within the associated user's HOME directory. The most likely cause is an error defining the HOME directory when the user was added to the system, or that theHOME directory was either never created or it was deleted.
Received TX0 for pid = [x] -	This is an informational message [x] output to confirm receipt of a command from SAM to terminate the indicated job after the user run the "Kill Job" command from a graphical interface. This does not indicate that the job actually was terminated; that event/inability will be confirmed in a subsequent message.
Can't fork() for [x] -	The agent is unable to create a decrementing max jobs to [x] process in which to run the indicated job, and is decreasing the number of jobs it will attempt to simultaneously run in an effort to preclude further fork() errors. If this is a recurring problem, the agent Configuration program can be run to lower the number of allowed jobs and/or the OS may need tuning to handle the load.
Job [x] completed	Informational message upon proper termination of an OpCon job -- does not reflect the OK/Failed termination status.
Data has not arrived in [x]	The agent has not received any seconds - closing socket communication from the SAM in the indicated amount of time. The agent will close the connection in preparation for SAM initiating a new connection. "[x]" can be set with the agent Configuration program.

Example

The following shows UNIX job (Ujob1) running in Schedule Operations without a user-defined status message:

Ujob1 (Daily) (Job Running – PID = 29613)

The following shows a UNIX job (Ujob2) running in Schedule Operations with a user-defined status message:

Ujob2 (Daily) (Job Running – Starting Step 1)

UNIX LSAM Exit Codes

When a job completes, the OpCon status will change to either 'Finished OK' or 'Failed'. The 20-character message text changes to include the exit codes from the job.

In the this next table is a breakdown of the agent Exit Codes.

note

Do not confuse these codes with UNIX System Exit Codes. LSAM Exit Codes come from the UNIX LSAM itself while UNIX System Exit Codes come from the UNIX operating system.

Exit Code Breakdown

UNIX Exit Code Breakdown

Section	Exit Code	Valid Values	Description
A	Job Exit Codes	-999999999 to +999999999	The first 10 characters of the exit condition consist of a plus (+) or minus (-) sign followed by nine digits indicating the job termination status (refer to agent-Specific Error Codes).
B	Signals	0000 to 9999	If the job terminated due to the receipt of a signal from the operating system or through user intervention, the four-digit numeric value of that signal is specified here.
C	Core Dumped	Y/N	Indicates whether or not (Y/N) a core file was created due to the termination of a job.

Unix LSAM Specific Error Codes

The following is a list of the UNIX LSAM job error codes. If an exit code is not in this list, it is a UNIX-specific exit code. For information on UNIX-specific exit codes, refer to [Completed Jobs and LSAM Exit Codes] in the UNIX LSAM online help.

Because errors returned vary from platform to platform, it is beyond the scope of this document to try to list the possible reasons for each error. Continuous recommends:

Examine the log files for the agent and determine the error number reported
Reference the MAN page for the system call to get more information on the causes of this failure type

UNIX LSAM Exit Code	Failed System Call	Description
000010000	<none>	The job definition does not contain a User ID.
000010001	<none>	The job definition does not contain a Group ID.
000010002	<none>	The job definition contains an invalid User ID.
000010003	<none>	The job definition contains an invalid Group ID.
000010004	<none>	The SMANetCom sent a job status request (TX2) for a job or for a prerun process to the agent. The agent checked to see if the job was still running. The job was not running, but was marked as running in the tracking file.
000010005	<none>	The agent was started and the job was shown in the tracking file to be running; however, the job was not actually running on the machine.
000010006	<none>	The agent was started and the prerun was shown in the tracking file to be running; however, the prerun was not actually running on the machine.
000010007	<none>	The job was not found in tracking file.
000010008	fork()	The system function fork() failed when attempting to create a child process.
000010009	<none>	Privileged runs are not allowed. The agent configuration does not allow jobs to be submitted as root.
000010010	<none>	Job was killed by user or system administrator.
000010100	fork()	Unable to fork() a process space for the prerun process.
000010101	setuid()	Unable to setuid() to the specified User ID for the prerun process.
000010102	setgid()	Unable to setgid() to the specified Group ID for the prerun process.
000010103	setpgid()	The system function setpgid() failed when attempting to set the parent Group ID for a prerun process.
000010104	<none>	Start Image not found or insufficient privileges for the prerun process.
000010105	exec()	The system function exec() failed when attempting to initialize the process space for a prerun process.
000010200	fork()	Unable to fork() a process space for the job.
000010201	setuid()	Unable to setuid() to the specified User ID.
000010202	setgid()	Unable to setgid() to the specified Group ID.
000010203	setpgid()	The system function setpgid() failed when attempting to set the parent Group ID for a job.
000010204	<none>	Start Image not found or nsufficient privileges for the job.
000010205	exec()	The system function exec() failed when attempting to initialize the process space for a job.
000010299	open()	The system function open() failed when the agent attempted to open the post-processing script. For more information on the post-processing script, refer to sma_ppscript in the UNIX LSAM online help.
000010300	fork()	The system function fork() failed when attempting to create a process for a post-processing script.
000010301	setuid()	The system function setuid() failed when attempting to set the User ID for a post-processing script.
000010302	setgid()	The system function setgid() failed when attempting to set the Group ID for a post-processing script.
000010303	setpgid()	The system function setpgid() failed when attempting to set the parent Group ID for a post-processing script.
000010304	<none>	Start Image not found or insufficient privileges for the post-processing script.
000010305	exec()	The system function exec() failed when attempting to initialize the process space for a post-processing script.

In many cases, a specific failure message is returned from the agent and viewable as field "agent Error Message" under the "General" tab of the Job Configuration screen. Messages begin with text generated by the agent, and conclude with parentheses containing an integer message ID and perhaps other test. If the error was the result of a system call, the additional text after the message ID would include the system-specific error number returned by the operating system, the symbolic name for this error (common to the vast majority of UNIX systems), and a brief description of the error as returned by the operating system. The UNIX error number and text varies from system to system. Also, a system call often has multiple failure modes, so the same message ID can be followed by a variety of error codes.

Example

The following shows a agent Error Message which might be returned for a agent exit code of 000010205:

[sma_lsam] (monitor) - Unable to execute [/usr/john/job_1] for [JOB1] (120 / 2 [ENOENT] - No such file or directory)

In this case, the user should check what was entered for "Start Image" on the Job Details screen.

UNIX File Arrival Exit Codes

The following is a list of UNIX LSAM exit codes specifically for File Arrival jobs.

Exit Code	Description
1	The file is not found. Reasons include an invalid file name, the file has not arrived yet, or permissions.
2	The path is not found. Reasons include an invalid path or permissions.
3	A file is found but the creation date is out of range.

Windows Machine Messages

This next table is a list of MSLSAM exit conditions for failed jobs. If an exit condition is not in this list, it is a Windows exit code.

MSLSAM Exit Condition Number	Description
31000	This is the initial state when the job is created. No error code has been set.
31001	The path entered for the command line on the details screen is invalid.
31002	The path entered for the prerun command line on the details screen is invalid.
31003	The prerun command line entered in the details screen for this job contains too many characters. The maximum length of the prerun is: 3276 characters
31004	The command line entered in the details screen for this job contains too many characters. The maximum length of the command line is: 4000 characters
31005	The prerun working directory entered in the details screen for this job contains too many characters. The maximum length of the prerun working directory is: 255 characters
31006	The working directory entered in the details screen for this job contains too many characters. The maximum length of the working directory is: 255 characters
31007	The agent could not create a process for this job.
31008	The agent was unable to obtain the rights for the user submitted with the job.
31009	The agent was unable to grant the user rights to the process.
31010	The agent was unable to log on as the user submitted with the job.
31011	The agent was unable to load the environment for the user submitted with the job.
31012	The agent was unable to load the Windows profile for the user submitted with the job.
31013	The agent was unable to unload the Windows profile for the user submitted with the job.
31014	The agent was unable to find the E.C.O.F. specified.
31015	The agent was unable to start the job in the specified user-security context (unable to impersonate the user).
31016	The agent was unable to find the user name for this user. This may be because the user has never logged onto this machine.
31017	Unable to get user token.

Windows File Arrival Exit Codes

The following is a list of Microsoft agent exit codes specifically for File Arrival jobs.

Exit Code	Description
1	The file is not found. Reasons include an invalid file name, the file has not arrived yet, or permissions.
2	The path is not found. Reasons include an invalid path or permissions.
3	A file is found but the creation date is out of range.

z/OS Machine Messages

Certain conditions on the z/OS LSAM may prevent SAM from completing a task and a message is produced indicating the source or cause of the error. The SAM is designed so that errors or invalid resource conditions do not cause a total halt of schedule processing. After reporting the error, the SAM may retry processing and may again encounter the same error and report it.

To prevent the SAM from encountering the same error repeatedly, the job(s) involved may be placed "ON HOLD", or the SAM may be placed "ON HOLD", until the error is resolved. Some errors may be resolved without operator intervention, such as a job exclusion or inclusion that cannot be satisfied. When the proper condition is satisfied, the SAM is notified by XPS390 and this resolves the error. If a condition is assigned to a DEMAND run, there may be a long time before the condition is satisfied; the SAM encounters the error repeatedly until resolution. Some messages require operator analysis or resolution; others are informational only.

Message Syntax

Al: OpCon for z/OS messages are formatted with IBM standard message notation:

XPSnnnc

XPS: The product identifier
nnn: The message reference number
c: A message type indicator

Message Type	Explanation
I	The message is Informational only.
A	The message indicates a possible or probable operator Action is required.
W	The message is a Warning message. Some operation or process may need review. The message indicates an Error condition. Corrective action is probable.
None	If type is none of the above, the message is Informational, and the type indicator represents the MODULE that issued the message: B=XPSUBMIT T=XPSTATUS X=XPSPLEX V=XPSSUPV O=XPSYSOUT S=XPSERVER

Messages Displayed on the MVS SYSLOG by XPR390

Exit Code	Message	Description
XPR001I	Restart: From start step [to end step]	Indicates a restart was requested from step start step, optionally ending in end step.
XPR001E	STEPNAME MISMATCH	- Indicates that step name on the starting step in the JCL does not match the name in the restart request. - The job is flushed.
XPR005I	stepname compcode (SKIPPED FOR RESTART)	Indicates the stepname was bypassed for the restart, but compcode is simulated for JCL conitianal processing.
XPR010I	DELETE dataset name (volume) XPR010I UNCATLG dataset name (volume) XPR010I HDELETE dataset name (MIGRAT) XPR010I RETAIN dataset name (volume)	-Indicates the dataset name is going to be created in the step about to start, but it is already caraloged. - OpCon takes the indicated action: DELETE: the dataset is to be removed from an online DASD Device. UNCATLG: the dataset is on tape of offline DASD, and is simply uncataloged. HDELETE: The HSM migrated dataset is the be deleted. Retain: the dataset matched the XPR filter table, and no action is taken.
XPR060A	No PCB Available - Activate agent	Indicates XPRLIST was requested to update the filter table, but the agent was not been started, and no stroage anchor block is available.
XPR101E	Invalid or missing parms	Indicates a command was issues to XPRLIST, but the command was not recognized.
XPR102E	NO XPSPARMS DD OR MEMBER NOT FOUND	Indicates XPRLIST was requested to load or reload the filter table, but either the XPSPARMS DD is not present, or the requested XPRLSTxx member is not in the dataset.
XPR105I	FILTER TABLE UPDATED	Indicates the XPR filter table was updated.
XPR200I	No Filter Table	An XPRLIST DISPLAY was requested, but there is not filter table.
XPR200I	Filter table contents	An XPRLIST DISPLAY was requested. This message is followed by the table contents.

Messages Displayed on the MVS SYSLOG by XPS390

Exit Code	Message	Description
XPS000W	Another agent is Already Running in the LPAR	- Indicates the new duplicate agent is terminated. - SMA Technolgoes recommends waiting for the priot agent to conplete before starting its replacement.
XPS001I	OpCon V v.rr.mmll Initialized -- [machineid]	- Indicates OpCon for z/OS has initialized storage queues and contaol blocks successfully. - MachineID is the MACHINEID= definition in the XPSRMnn, or the SMF ID of this LPAR, and subsequently the schedule "Machine ID" for events that is honored bu this agent.
XPS002W	XPSPRMnn Set to Vendor Defaults	- Indicates no XPSPRMnn member was located in the start parameter list of the parmeter library. - The resulting default parameter values can be viewed with the "F agent,PARMS" command.
XPS003I	Storage Recovery Attempt	Issued during back out or remove processing.
XPS003E	Error During Storage Allocation Storage Recovery Failed for queuename	- Indicates an MVS FREEMAIN error was encountered. -Contact Continuous Support if this message persists of the reason for its issuance cannot be determined.
XPS004A	RUNPARM Not Initaliatlized-Restart	- Indicates the parms dataset was no located in the start parameter list or the parameter library and the operator answered "N" to the XPS101V operator request. - Supply the Parms dataset and restart.
XPS005I	TCP/IP - IP Open (nnn.nnn.nnn.nnn) Port: pppp	Issued during agent IP network initialization to indicate the LPAR Host IP address (nnn.nnn.nnn.nnn) returned bu the OMVS "GETHOSTID" request, and to indicate the IP Port (pppp) on which XPS390 is listening for SAM messages.
XPS006E	[subroutine] Abend/Shutdown Detected	- Indicates the subroutine encountered an error and the agent is systematically shutting down the remaining subtasks and closing SAM Communications. - The agent terminates and must be restarted. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS007E	Error During Storage Allocation	- Indicates an MVS GETMAIN errror was encountered. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS008E	Token Fetch Error RC=8	- Indicates an MVS CSA queue locate error was encounted. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS009I	System Shutdown Underway	- This is a response to an F agent,SHUTDOWN request. - Indicates the agent is systematically shutting down operational subtasks, stopping XPSPLEX and closing SAM communications. - The agent terminiates.
XPS010I	Subtask Shutdown Underway	- This is a response to an internal/external shutdown request. - This message may follow an XPS009I or XPS006E message. Indicates the agent is systematically shutting down operational subtaskes and closing SAM communication. - The agent terminates.
XPS011I	[Job\|Message] Queue Cleared	- This is a response to an F agent,CLEARQ operator command. - Indicates all ongoing schedule tracking fails.
XPS012I	Storage Recovery Complete	- This is a response to a GETMAIN failure. - This message may follow an XPS033E message. - Indicates the agent was successful in freeing all allocated CSA prior to terminiation.
XPS013E	INITAPI Error: XPSERVER tcpiptask	- Indicates the XPSERVER subroutine could not establish an interface to TCP.IP on this LPAR. - Ensure that TCP/IP is operating properly and that an OMVS segment is defined to the security facility for OpCon. - Ensure that the TCP= parameter in XPSPRMnn denotes the proper task name for the environment.
XPS014I	PSAM Initialization - Server in XCF Mode	- Issued at an agent startup to indicate that the XPSERVER subroutine does not attempt to open IP communications to the SAM. - All communications to the scheudle activity monitor is accomplished through the Sysplex Coupling Facility and the LPAR designated as the Sysplex primary agent.
XPS015A	XPS390 Awaiting Connection to the SAM Server XPS015O - XPSYS0 Awaiting Connection to UI Window	- Indicates a temporary communication disconnect occureed between the agent and the SAM schedule system. - The agent waits approximately 20 seconds and retries the IP Socket ACCEPT request. - If this message persists and all communication protocols appear operational, contact the TCP/IP LAN Network Support Technician. - The type code "0" in dicates the message was issues by XPSYSOUT.
XPS016I	XPS390 SAM Server Connection Established XPS016O - XPSYS0 Window Connection Established	- Indicates that the temporary disconnect was corrected, and the agent and the SAM are in communication. - The Type code "O" indicates the message was issued bu XPSYSOUT. - This message mornally follows message XPS015A.
XPS017W	Cannot Bind Port; Suspending Retry for 30 Seconds XPS017O - Cannot Bind Port; Suspending Retry for 30 Seconds	-Indicates a temporary communication disconnect occurred between the agent and the SAM schedule system. - The agent waits approximately 30 seconds and retries the IP Port BIND request. - This message may be a normal result of stopping and immediatelly restarting the agent. - z/OS TCPIP often "hold(s)" access to a port after it is closed to ensure any buffered messages are completed before allowing the prot to be reopened. - If this message persists and all communication protocaols appear iperational, contace the TCP/IP LAN Network Support Technician. - The Type code "O" indicates the message was issued by XPSYSOUT.
XPS018W	Cannot Obtain Socket; Suspending Retry for 30 Seconds XPS018O - Cannot Obtain Socket; Suspending Retry for 30 Seconds	- Indicates a temporarycommunication disconnect has occurred berween the agent and the SAM schedule system. - The agent waits approximately 30 seconds and retries the IP Socket connection. - This message may be a normal result of stipping and immediately restarting the agent. - z/OS TCPIP often "hold(s)" access to a port after close to ensure any buffered messages are completed before allowing the port to be reopened and a socket assigned. - If this message persists and all communication protocols appear operational, contact the TCP/IP LAN Network Support Technician. - The Type code "O" indicates the message was issues by XPSYSOUT.
XPS019E	Storage Recovery Failed for [queuename]	- Indicates the MVS FREEMAIN error was encounted dureing a REMOVEX, REPEXIT or RESET command. - The agent could not free storage for [queuename] that was assinged to the agent. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS020W	Process CSA Will Change at Next IPL	- Issued in response to an "F agent,PROCESS=nn" operator command. -CSA storage is allocated at IPL to coincide with the expected process limit set in the agent/Machine environment.
XPS021I	Current Stored PARMS for [sysid]	- Issued in response to an "F agent,parm=" operator command to indicate the status of all run time parameters after processing the last command. - A list of current agent parameters settings follows this message. - This message and the subsequent parameter list are also issued bu an "F agent,PARMS" command or by running this XPSAUDIT program. - Noe that the PROCESSES display issues does NOT show a "Stored" Process of zero. Since this cound is used to size CSA storage queues, only the SAM is advised of a process of ZERO.
XPS022W	No PARMS Updated	- Indicates a parameter update request was invalid. - No Parms are updated if any parameter in the request command is invalid.
XPS023I	Process Count Set to Zero	- Indicates a Machine Process Count of "0000" has been sent to the SAM. - This is the same as indicating a "Machine Down" condition. - Issued in response to an "F agent,PROCESS=0" operator command. This command is particularly useful when an z/OS system QUIESCE is underway. It allows a pause in the scheduled event traffic to this LPAR without detailed changes to the SAM schedule. If the agent is shutdown, the process cound reverts to the value defined in the XPSPRMnn upon restart. Note that the PROCESSES display issued at message XPS021I does NOT show a "Stored" Process of zero. Since this count is used to size CSA storage queues, only the SAM is advised of a process of ZERO.
XPS024A	Parameter Invalid: [parm]	- Issued if a parameter error occurs during the agent start-up. If this is issued the agent termintes. - Indicates the parm is invlid in response to one of the following: A RUNPARM memebr load during start-up. An operator command (F agent,parm=value). An agent JCL Parm (PARM='parm=value') Correct and retry the operation.
XPS024E	Parameter Invalid: [parm]	- This message is essentially the same XPS024E. The both indicate a parameter error. - Issued when a user enters an invalid parameter after the agent is started. The agent continues to run, but the new parameter is rejected.
XPS025E	LOG Dyn Alloc Error R15=nnnn	- Indicates the LSAMLOG dataset could not be allocated. - This error may be due to a catalog error ot an invalid GDG override in the OPCONnn Proc. - The task terminates. - Restart the task. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS026E	Error Opening XPSLOG - Restart	- This indicates an open request failed after successfully allocating the RECLOG DD. - The task terminates. - Restart the task. -Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS027I	OpCon agent Log Dataset Spin-Off Underway	Each midnight (00:00) and upon operator request (F agent,SPINLOG) and new generation of the OpCon RECLOG is created. Logging is suspendeed during the actibvity of de-allocating, closing, re-allocating, and reopening the log.
XPS028I	Sysout Agent Ready on Port:nnnn-JESx	- Indicates the Enterprise Manager Sysout View agent (XPSYSOUT) sucessfully opened the IP communication port (nnnn) for SYSOUT requests. - JES displays the SAPI subsystem from which SYSOUT is retrieved.
XPS029I	Stop Command Recognized	- This is a response to an "F agent,STOP" or a "P agent" operator command. - Indicates the agent is systematically shutting down operational subtasks and closing SAM communications. - The agent terminates.
XPS030I	[eventname] Adopted From ssss	- Indicates an Event normally run on another LPAR being run on the current LPAR due to Sysplex adoption of the target Machine-ID. - To view the status of Sysplex Machine-IDs with respect to the current LPAR, issue command: F XPSPLEX,STATUS.
XPS031E	Invalid Jobname Bypassed: [jobname]	- Indicates the Job Name is an invalid MVS construct. - This message is usually due to a special character in the job name or other invalid usage. - XPS390 automatically converts lowercase characters to uppercase prior to seatching the defined library for the JCL or Event Name.
XPS032E	JCL Member Not Found: [job name] in [library DDNAME]	- Indicates the SAM schedule requested JCL for [job name] be submitted from [DDNAME] and the agent could not locate such as member name. - Correct and reschedule.
XPS033E	[jobname] Invalid JobCard	- Indicates the SAM schedule request JCL for [jobname] be submitted and the agent encountered an invalid MVS Job Card. - Correct and reschedule.
XPS034E	JCL Library BLKSIZE Invalid	- Indicates the Block Size of each JCL PDS library must be greater than 800. - Contace the MVS system Programmer for assistance. - Meddage XPS035S follows with the DDNMAE of the library.
XPS035E	Library DDNAME Error: [ddname]	- Indicates the SAM schedule requested JCL be submitted from [ddname] and the agent could not locate such a library or the library had a non-recoverable error. - Correct and reschedule.
XPS036E	Allocation/Open Error on INTRDR	- Indicates an XPSUBMIT subtask was unable to allocate an internal reader for JCL submission. - Restart the agent. - Contact the JES System Programmer and ensure that there are enough INTRDRs defined. - Contact Continuous if this message persists or the reason for its issuance cannot be determined.
XPS037I	jobname(J0000) Submitted From [library] as [event name] XPS037I - taskname(S0000) Submitted as [event name]	- Indicates that a successful Batch JCL submission has occured. - The Schedule Event [event name] requested submission of [jobname] from DDNAME: [library]. - JES has assigned the job number (Jnnnn). - Indicates that a successful Start Task initiation has occurred. - The Schedule Event [event name] requested submission of [taskname]. MVS has assigned the task number (Snnnn).
XPS038E	[ddname] DD Error For REXX Event: [eventname]	- Indicates the [ddname] requested on the SAM schedule record (or the default DD SYSEXEC) for a dynamis REXX event, is not defined to the agent. - Correct and reschedule.
XPS039E	Token/Symbolic Syntax Error: [jobname]	- Indicates an invalid syntax for a &SYMBOLIC or \@Token entry in the detail schedule record for [jobname] was encountered. - Correct and reschedule.
XPS040A	Auditor Has Reestabilished EOQ Marker	- Indicates that a tracking queue was not properly synchronized and automatic recovery succeeded. - Contact Continuous Support if this message persists.
XPS041W	Warning: Cannot Establish EOQ Marker	- Indicates a queue format error cannot be recovered. - Contact Continuous Support if this message persists.
XPS042E	CRC Error Detected - Retrying Request	- Indicates the Check Record hash did not agree with the one sent by SAM. - This is a probably temporary network error. - This is a probably temporary network error. - The XPSERVER subroutine discards the related record and request that SAM resend that request. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS043W	DSN Exit Storage Not Freed XPS043W - ACTRT Exit Storage Not Freed XPS043W - U83 Exit Storage Not Freed XPS043W - U84 Tracking Exit Storage Not Freed XPS043W - UJV Exit Storage Not Freed XPS043W - USI Exit Storage Not Freed	- Indicates a request was made to release exits (F agent,REPEXIT) and the old storage area was not successfully freed. - This condition is bypassed and the new exit is loaded; however, repeated messages of this type may indicate that storage fragmentation in ECSA is possible.
XPS044W	WTO Exit Storage Not Freed	- Indicates a request was made to reload exists (F agent,REPEXIT) and the old storage area was not successfully freed. - This condition is bypassed and the new exit is loaded; howeverm repeated messages of this type may indicate that storage fragmentation in ECSA is possible.
XPS045E	Allocation Error on Sysout DS	- Indicates the XPSYSOUT Agent encountered an error while allocating a JES Sysout. - The probably cause for tihs error is that theSysout is no longer available on the output queue.
XPS046W	TCP/IP Timeout: agent Has Lost Contact with SMA NetCom Service.	- Indicates the XPSERVER has timed out waiting on Netcom to respond. - The agent continues to poll the SMA Server every 10 to 20 seconds. - This may be caused by a network outage or NetCome shutdown. - Whne communication is resumed, message XPS093I is issued. - If this message persists and all communication protocols appear operational, contact Continuous Support.
XPS046O	TCP/IP Timeout - [process] Restarting.	- Indicates the XPSAGENT has timed out waiting on IP Window Response to the [process] indicated. - This is not critical communicatons. - If this message persists and all communication protocols appear operational, contact Continuous Support.
XPS047I	[$event]	- This is a response to a step condition code or DSN trigger. - Indicates the event command [events] was sent to the SAM. - The condition or trigger was caused by the job issueing the message.
XPS048O	InitAPI Error: XPSAGENTtcpiptask	- Indicates the XPSERVER module cannot establish an interface to OpenMVS API. - This error may be due to an OMVS sefment not being defined in the security priduct or a failure in TCP/IP. - Contact Continuous Support if this message persists or the reason for its issuanse cannot be determined.
XPS049A	[eventname] Not in Event Table	- This is a response to a step condition code or DSN trigger. - Indicates the event command [*eventname] was referenced, but could not be located in the LPAR event table. - The condition or trigger was caused by the job issuing the message. - Inspect the Event Table and ensure that the event name is spelled correctly and the table entry is available to this LPAR.
XPS050E	XPSCOMM PARM Error	Indicates an invalid PARM= parameter was found on the XPSCOMM run state or the KEY=.
XPS051E	XPSCOMM Tracking Error	- Indicates the XPSCOMM encountered an error attempting to update the tracking record of the job in question. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS052I	XPSCOMM Processing Successful	Indicates that the requested tracking queue update was successfully accomplished bu XPSCOMM.
XPS053A	Invalid Sysid for Adoption	- This is a response to an F agent,ADOPTWKLS(ssss,nn) command. - Indicates as invalid sysid (ssss) was requested. - The current LPAR SMFID and those of currently operating LPARS are not valid.
XPS054A	Invalid Reply	- Indicates the operator responded incorrectly to either the XPS112A ot XPS113A message. - Review these message descriptions for the proper reply syntax.
XPS055A	SYSPLEX Mode Not Supported	- Indicates a Sysplex Only request was made (starting XPSLEX, etc.) that was inconsistent the SYSPLEX parameter in XPSPRMnn. - Ensure SYSPLEX=Y is coded in the XPSPRMnn to enab3e Sysplex services in OpCon.
XPS056I	XPSPLEX Already Running	- Indicates an attempt was made to start another XPSPLEX task when one was already running. - Onlly one XPSPLEX task is allowed. - The newly started task terminates.
XPS057A	Invalid Command	- Indicates an "F XPSPLEX,command" was entered and the command syntax was invalid. - Refer to the syntaz of the F XPSPLEX command for further details.
XPS058W	WTO Msg Tracking Exit NOT Loaded	- Indicates an internal error has prevented message tracking exit XPSWTOEX from loading. - Message XPS073E or XPS068A may precede this message with causes. - The WTO exit is not optional. - Besides providing message triggering for scheduled event, it also provides for Not Catlg error support and other internal OpCon support features. - Contact Continuous Support if the reason for this message cannot be determined.
XPS059E	Failed to [Process Function] RC=nnnn	- Indicates the [Process Function] is a critical internal operational function. - The diagnostic infomration in this message must be passed to Continuous Support as soon as possible. - The OPCONnn task may not continue to function if this error persists.
XPS060E	No PCB Available for Restart - Activate agent	- Indicates a control block format error cannot be recovered during initialization. - Events that were "in process" during a system outage might not be properly reported to SAM. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS061E	XPSU84 Foreign Job Tracking Error	- Indicates the agent encountered an OpCon job submitted from a different NJE/MAS or JES2 LPAR that is not in agent/PSAM configuration. - The job was canceled. - Check the schedule detail for this job and review the job "Machine ID" field. - Check the JCL for SYSID routing information and class assignments. - Contact the applicationprogrammer or Scheduler for futher information.
XPS062I	XPSU84: Step Action Initiated	- This is a TRACE Level 2 response. - It is received from the IEFU84 exit when the OpCOn trace facility is active. - The trace facility should not be active unless specifically requested bu Continuous Support. - To eliminate these messages enter command "F agent,TRAC=N".
XPS063I	XPSU84: Step Tracking Initiated	- This is a TRACE Level 2 response. - It is reveived from the IEFU84 exit when the OpCon trace facility if active. - The trace facility should not be active unless specifically requested by Continuous Support. - To eliminate these messages enter command "F agent,TRAC=N".
XPS064I	XPSU84: Tracking Record Updated	- This is a TRACE Level 2 response. - It is reveived from the IEFU84 exit when the OpCon trace facility is active. - The trace facility should not be active unless specifically requested bu Continuous Support. - To eliminate these messages enter command "F agent,TRAC=N".
XPS065E	XPSCOMM Event [eventname] Not Found	- Indicates the Event Token coded in the $EVENT=[eventname] parameter in the XPSCOMM program was not located in the system Event Table. - Contact the Production control department. - Request that the production control department inspect the Event Table and ensure that the event name is spelled correctly and the table pentry is available to the LPAR on which that job ran.
XPS066E	[queuename] CSA Queue Full!	- Indicates there is not enough space in the [queuename] for additional entries. - refer to the definitiaon in the SETQUES= parameter in XPSPRMnn. - Refer to current SETQUES setting using the "F agent,DISP=PARMS" command. - Contact Continuous Support IMMEDIATLY if the reason for this message is not obvious.
XPS067E	ADD/POST Error on Submitted Request	- Indicates the XPSERVER subroutine encounted an error attempting to update a tracking record. - Contact Continuous Support if this message persists.
XPS069I	agent Task Must Be Down Before XPSPLEX Shutdonw	- This is a response to and operator command to shut down XPSPLEX. - Indicates OPCONnn is still exevuting. - The OPCONnn task must be terminated before XPSPLEX can be sut down. - To shut down BOTH tasks (OPCONnn and XPSPLEX) use the "F agent,SHUTDOWN" command.
XPS070I	Pre-run Condition(c) Check: [eventname] [OK\|Failed] For Job: [jobname]	- Indicates that the TaskPre-run condition was either met (OK) or failed (Failed) for the [jobname] in questions. - The Task Pre-run condition (c) can be: E=Running N=Not Running -Refer to the scheduled [eventname] detail for infomration.
XPS071I	Prerun Check:aa/nn Unit=[unitname] Rdy For [jobname] at hh.mm.ss	-Indicates that the Task Pre-run tape unites needed (nn) for [unitname] was tested and aa units were found available. -If the count in aa is equal to or greater than the number of units needed (nn), job [jobname*] is submitted immediately; otherwise, the job is sent back to SAM with a "Pre-run Failed" condition and SAM reschedules the job at the interval set by SAM installation options.
XPS072I	Prerun DSN: [trigger.dsname.suffix] For [jobname] Triggered by [+] [taskname] at hh.mm.ss	- Indicates that the Task Pre-run Data Set Name (DSN) ending with the 20-character suffix [trigger.dsname.suffix] has been accessed as required buy the pre-run condition in [jobname]. - The running job or task that triggererd the DSNAME access event is denoted bu [taskname]. - If [taskname] is preceded bu a plus sign ( + ), the trigger was manually released, in which the TSO Userid responsible for setting the trigger's count to zero.
XPS073E	[Error Condition]	- Indicates a Trigger or Tracking Exit did not load properly. - One of the following could not load an interface to MVS: XPSWTOEX XPSUJV XPRUSI XPSU84 XPSU83 - Following a general description, each error condition is described in detail below.
XPS073E	BLDL Failed for XPS3U84 \| XPSU83 \| XPSUJV \| XPRUSI \| XPSWTOEX	- Indicates an error occurred in an attempt to load one of the trigger exists (i.e., the LOADLIB DD statement in the OPCONnn Proc failed to return the member name). - Check to ensure the STEPLIB or link list contains the module. - Contact Continuous Support if this message persists or the reason for its issance cannot be determined.
XPS073E	U84 \| U83 \| UJV \| USI \| WTOX Length not in TTR	- Indicates an error occurred in an attempt to lood one of the trigger exits (i.e., the LOADLIB DD statemene in the OPCONnn Proc return the member name but the member has zero records). - Check to ensure the STEPLIB or link list contains the named module. Relink these modules using the STAGE2 JCL if necessary. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS073E	Fixed ESQA Getmain Failed: U84EX \| U83EX \| UJVEX \| USIEX \| WTOEX	- Indicates an error occurred in an attempt to load one of the trigger exits (i.e., the extended storage was not available for the request). - Approximately 2.5K is needed in extended SQA for each module. - Contact the system programmer to research the amount of extended storage allocated. - Contact Continuous Support if this message persists of the reason for its issuance cannot be determined.
XPS073E	Explicit Load for XPSU84 \|XPSU83 \| XPSUJV \| XPRUSI \| XPSWTOEX Failed	- Indicates an error occurred in an attempt to load on of the trigger exits (i.e., the LOAD Macro returned a nonzero return code). - This error may be due to environmental factors. - Retry the load request [F agent,REPEXIT]. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS073E	CSVDYNEX Add Failed for XPSU83 \| XPSU84 \| XPSUJV \| XPRUSI	- Indicates an error occurred in an attempt to load XPSU83 into the SMF IEFU83 exit list (i.e., the CSVDYNEX Macro returned a nonzero return code). - Additional messages are issued to the z/OS console by the Dynamic Exit Service. - Ensure SYS.IEFU83 is properly defined to SMF. - Correct the problems indicated by the associated messages, then retry the load request [F agent,REPEXIT]. - Contact Continuous Support if this message or the reason for its issuance cannor be determined.
XPS073E	XPS390 Not Initialized	- Indicates XPSELOAD program cannot be run "stand alone" without OpCon being initialized. - Start the OPCONnn task to reload exits automatically.
XPS074I	Pre-run Skipped by SAM Request: [jobname]	- Indicates that the OpCon operator has manually requested that the associated job be submitted without pre-run resource checks.
XPS075E	DSN Table Expire Date: yy.ddd	- Indicates that any DSN trigger entries that have not been referenced since Julian date yy.ddd are expired from the current tracking table. - The entry is reinstated if a job has a pre-run requirement specified. This value fixed by architecture.
XPS075I	Trigger Table Expire Date: xx.xxx	- Indicates the agent log has spun off and a copy of the dataset and message tables was written to a new log. During this loggin action, the agent calculates and reports an expiration date in the system log. - The agent reports the date in Julian format, with a two-digit year and three-digit day number.
XPS275I	EXPIRING: xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx	- Indicates a trigger table entry has not been referenced since the Trigger Table Expiration Date. The agent deletes the table entry, logs the action, and reports it to the system log. Refer to XPS075I - Trigger Table Expire Date: xx.xxx. - The variable portion of the message contains the dataset or message filter of the deleted entry.
XPS076E	Error Loading SMF Tracking Exits	- Indicates an error occurred in an attempt to load and SMF exit. - Message XPS073E should precede this message with more detailed problem information. - Contact Continuous Support if this message persists or the reason for its issuance cannot be determined.
XPS077I	[exitname] loaded from [library]	- Indicates which library the exit loader loads from. - The [exitname] is the name of the exit being loaded. Depending on where the exit module was found, the [library] is either STEPLIB or is the name of the active linklist set.
XPS077I	XPSACTRT Step Messaging Established	- Indicates that the dynamic load for the XPS390 SMF exit for step messages was successful.
XPS077I	XPSU83 File Trigger Exit Established	- Indicates that the dynamic load for the XPS390 SMF exit for file triggering was successful.
XPS077I	XPSU84 Job Tracking Exit Established	- Indicates that the dynamic load for the XPS390 SMF exit for job/step tracking was successful.
XPS077I	XPSUJV Job Init Exit Established	- Indicates that the dynamic load for the XPS390 SMF exit for job submission tracking was successful.
XPS077I	XPRUSI Step Init Exit Established	- Indicates that the dynamic load for the XPS390 dataset cleanup exit for restart was successful.
XPS079I	XPSWTOEX Msg Trigger Exit Established	- Indicates the WTO exit interface was successfully established.
XPS080A	XPS390 Not Initialized	- Indicates control block format error caused a temporary tracking failure. - This message may be issued during a "RESET" command. If this message is received at any other time, contact SMA Support.
XPS081A	XPS390 Tracking Record not Available	- Indicates control block format error caused a temporary tracking failure. - This message may be issued during a "RESET" command. If this message is received at any other time, contact SMA Support.
XPS082E	XPS390 Dyn Alloc Error: R15=nn; DALERR=xxxxxxxx	- Indicates an error occurred while attempting to allocate the SYSEXEC DD for REXX dynamic call support. - Refer to the associated MVS allocation messages. Where nn is the return code from SVC99 and xxxxxxxx is the failing Text Unit. - Contact SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS083I	[DSN \| WTO] Table Entry: [entrytext] Added \| Deleted by [jobname] at hh.mm.ss {via ISPF}	- Indicates that the agent or a TSO user (via ISPF) has added a new DSN to WTO trigger to the Sysplex. - The [entrytext] is the dataset name or WTO Text of the trigger. Refer to the [jobname] on the appropriate OpCon schedule to determine the actual event this addition is to trigger. - The ISPF form of this message is issued for ISPF TSO User table updates to the DSN Trigger table only if SPFAUDIT=Y is coded in XPSPRMnn. - This message is also issued for ISPF User deletes.
XPS084I	REXX:[execname] ID=[*eventname8] Running	- Indicates the REXX [execname] was successfully called by XPSEVENT after dynamic allocation of SYSEXEC, SYSTSPRT and SYSTSIN. - This message does not indicate the REXX has successfully completed.
XPS085I	REXX:[execname] RCD=nnnn, ID=[eventname]	- Indicates the REXX [execname] was completed via XPSEVENT. - If the REXX routine set the EXIT (nn) code, then RCD contains the set value.
XPS086I	ADOPT Command Successful	- Indicates the agent has processed the operators ADOPTWKLD command. - To review the status of Machine ID processing on this LPAR enter the F XPSPLEX,STATUS command.
XPS087I	DROP Command Successful	- Indicates the agent has processed the operators DROPWKLD command. - To review the status of Machine ID processing on this LPAR enter the F XPSPLEX,STATUS command.
XPS088I	Command: command For: XXXXXXXXXXXX Run	- Indicates execution of the MVS Command [command] was requested by XPSEVENT. - XPS390 does not check the outcome if operator commands; nevertheless, associated "Message Triggers" may monitor the results of any given command.
XPS089I	REXX:[rexxname] RCD=[rtncode], ID=[eventname]	- Indicates the agent has successfully run the REXX routine [rexxname] as scheduled by event [eventname]. - The return code [rtncode] from the REXX routine is passed back to the SAM.
XPS090A	XPCB Token Not Initialized	- Indicates the agent is entering "Primary Initialization" and allocating CSA storage for the first time after a system IPL. - If this message is received at any other time, contact SMA Support.
XPS091A	XPCB Control Block Not Initialized	- Indicates a control block format error caused a temporary tracking failure. - This message may be issued during a "RESET" command. - If this message is received at any other time, contact SMA Support.
XPS092I	REXX:execname ID=XXXXXXXXXXXX Prerun Exec	- Indicates the REXX [execname] was successfully called by XPSEVENT as requested by [ID] after dynamic allocation of SYSEXEC, SYSTSPRT and SYSTSIN. - The message does not indicate the REXX has successfully completed.
XPS093I	OpCon/xps SAM Contact Reestablished	- Indicates XPSERVER had timed out waiting on Netcom to respond (message XPS046 should have been pending). - This condition is no longer a problem and normal communications have been reestablished.
XPS094E	Event: [eventname] Missing	- Indicates the event name noted was referenced by a DSN trigger, but was not found in the Event Table. - Review the DSN trigger definitions and create/rename the event name to match the name in the DSN trigger entry.
XPS095E	Event: [eventname] Missing	- Indicates the event name noted was referenced by a WTO trigger, but was not found in the Event Table. - Review the DSN trigger definitions and create/rename the event name to match the name in the WTO trigger entry.
XPS096I	Sysplex Member: [memberid] Active as [PSAM \| agent]	- Indicates the XPSPLEX task has recognized that the LPAR shown in Sysplex member [memberid] has joined the OpCon Sysplex group as a PSAM or an agent. - nly one agent can be allocated in any one Sysplex configuration.
XPS097I	XRF/CF Link for Grp: [groupname], Mbr: [memberid]	- Indicates the XPSPLEX task has successfully joined the LPAR to the OpCon Sysplex group [groupname] as member [memberid].
XPS098E	XRF/CF MSGX Error: [returncode]; [reasoncode]	- Indicates XPSU84 has experienced an error or interruption in Sysplex communications to other OpCon members and was unable to send job status information. - Report this message to SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS099B	XRF/CF [errrtn] Error: [returncode]; [reasoncode]	- Indicates XPSUBMIT has experienced an error or interruption in Sysplex communications to other OpCon members. - Report this message to SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS099E	XRF/CF [errrtn] Error: [returncode]; [reasoncode]	- Indicates XPSERVER has experienced an error or interruption in Sysplex communications to other OpCon members. - Report this message to SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS099T	XRF/CF [errrtn] Error: returncode]; [reasoncode*]	- Indicates XPSTATUS has experienced an error or interruption in Sysplex communications to other OpCon members. - Report this message to SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS099X	XRF/CF [errrtn] Error: [returncode]; [reasoncode]	- Indicates XPSPLEX has experienced an error or interruption in Sysplex communications to other OpCon members. - Report this message to SMA Support if this message persists or the reason for its issuance cannot be determined.
XPS100I	[jobname]: Tracking Record Added.	- Indicates the [jobname] has been added to the current AdHoc schedule due to a match on the TRACLASS or TRACMASK parameters in XPSPRMnn.
XPS101I	Step Cond Code IGNORED as Requested	- Indicates the SAM schedule entry for this job requested that the job be considered "OK" even if a given step ended in a condition code equal to or higher than a defined value. - The job continues to process but OpCon tracking is halted and a "Step OK" message is sent to the SAM. - Check the schedule detail for this job and review the step "Cond Code OK" field. - Contact the application programmer or scheduler for further information.
XPS102I	Job Marked FAILED Due to Step Cond Code	- Indicates the SAM schedule entry for this job requested that the job be considered a failure if a given step ended in a condition code equal to or higher than a defined value. - The job continues to process but OpCon tracking is halted and a "Job Fin Error" message is sent to SAM. - Check the schedule detail for this job and review the step "Cond Code Fail" field. - Contact the application programmer or scheduler for further information.
XPS103I	Job Marked COMPLETE Due to Step Cond Code	- Indicates the SAM schedule entry for this job requested that the job be marked "Complete" if a given step ended in a condition code equal to or higher than a defined value. - The job continues to process but OpCon tracking is halted and a "Job Fin OK" message is sent to SAM. - Check the schedule detail for this job and review the step "Cond Code Comp" field. - Contact the application programmer or scheduler for further information.
XPS104I	Job TERMINATED Due to Step Cond Code	- Indicates the SAM schedule entry for this job requested that the job be cancelled if a given step ended in a condition code equal to or higher than a defined value. - That value was met or exceed by this job step. - The job is terminated after the offending step. - Check the schedule detail for this job and review the step "Cond Code Abort" field. - Contact the application programmer or scheduler for further information.
XPS105A	Confirm Y/N is XPS390 to be REMOVED \| RESET \| CYCLED?	- This is a response to an "F agent, REMOVEX" or "F agent,RESET=S \| C" command. - Prompts the operator is prompted for confirmation of the action. - A Reply of "Y" causes all internal storage allocations to be freed and reallocated. - For RESET=S or REMOVEX, all current data in the queues, except DSN and WTO trigger monitor entries, are lost.
XPS106I	DSN: [dsname] Has Triggered Event: [eventname]	- Indicates an ACTIVE unscheduled DSN trigger for the Data Set [dsname] has been satisfied. - The action defined in Event Table entry [eventname] is taken. - To view the event detail, use the XPSPF001 TSO table interface command.
XPS107A	Confirm Y/N is Process Count to Remain at ZERO?	- Once the Process Count is set to ZERO (Refer to message XPS023I) any subsequent parameter update request, including another nonzero Process request, causes this prompt to be issued. - A reply of "Y" leaves the process count at "0". - A reply of "N" reverts the process count to the last value defined by PROCESS= command or the value in XPSPRMnn. Note: The PROCESSES display issued at message XPS021R does not show a "Stored" Process of zero. Since this count is used to size CSA storage queues, only the SAM is advised of a process of ZERO.
XPS108I	Message from: [job/task name] Has Triggered Event: [eventname]	- Indicates an ACTIVE unscheduled WTO message trigger was activated by job [job/task name]. - The action defined in Event Table entry [eventname] is taken. - To view the event detail, use the XPSPF001 TSO table interface command.
XPS109E	XPSU84: Locate Error - Tracking Suspended: [schdkey] XPS109E - [jobname]: Locate Error - Tracking Suspended	- Indicates a tracking error was encountered. - Contact SMA Support if this message persists or the reason for its issuance cannot be determined. - A possible reason for this message may be that a scheduled job was awaiting execution when the system, or LPAR failed. After IPL, the agent task was not yet started before the JES initiators, and no tracking queue addresses match the original submission addresses. XPS390 allows the job to run, but does not report status to SAM or may report a "failed" status. It is possible to manually complete the job on SAM and continue processing.
XPS110A	XPSPRMnn Not Initialized, Reply Y/N to Use SMA Defaults	- Indicates that the agent is in "Primary Initialization" and allocating CSA storage for the first time after a system IPL and no XPSPRMnn are available. - If this message is received at any other time, contact SMA Support. - XPSPRMnn can be provided through the XPSPRMnn DD statement in the OPCONnn Proc.
XPS111A	Enter Recovery Options: RESTART or IGNORE	- Indicates the XPS390 agent Recovery Management routine has found that scheduled events were running or "in-process" when the system IPL occurred. - Reply "RESTART" to this message for the agent to report failing jobs to SAM. - Reply, "IGNORE", if all SAM reconciliation is complete.
XPS112A	Two LPARS Cannot Both be agent Primary. Enter Sysid of PRIMARY agent: [sysid1] or [sysid2]	- Indicates more than one LPAR has agent=Y coded in the XPSPRMnn member. - or - - Indicates a response to a prior XPS113A message, the operator established a new Primary agent Machine ID. Another Primary agent is now attempting to enter the OpCon scheduling Sysplex. - Enter the SMF Machine-ID of the LPAR to maintain Primary agent Gateway control. - The non-primary agent is terminated and the user has to restart it after correcting XPSPRMnn parameters.
XPS113A	agent on [sysid] Has Left the Sysplex. Enter Y/N For This Member to Assume agent Status.	- Prompts the user if the z/OS LPAR on which this message was issued can adopt all the functions of the Primary agent, which has apparently left the Sysplex complex. - A response of "N" returns this LPAR to its normal PSAM status. - A response of "Y" requires following the procedures for agent Fail-Over.
XPS115E	Security Check Failed RC=nnn-nnn; R15/R0=nnn; Contact Technical Support	- Indicates an error occurred when the XPSAFAPI attempted to establish an SAF security environment for XPSAGENT. - Contact SMA Support if the reason for this error cannot be determined.
XPS116E	RACDELETE Failed; RC=nnn-nnn; R15/R0=nnn/nnn; Contact Technical Support	- Indicates an error occurred when the XPSAFAPI attempted to remove an SAF security environment for XPSAGENT. - Contact SMA Support if the reason for this error cannot be determined.
XPS117A	[Userid] Not Defined to Security Subsystem	- Indicates an error occurred while the XPSAGENT editor interface was attempting to update JCL in an OpCon defined library. - The [*Userid] of the OpCon user attempting the update was not found in RACF, Top Secret, ACF2 or other security system. - Access is denied to this user and the update is not made. - Message XPS122I may precede this message with the name of the JCL member this user was attempting to update.
XPS118A	[Userid] Not Authorized to Access [dsname]	- Indicates an error occurred while the XPSAGENT editor interface was attempting to update JCL in an OpCon defined library. - The [Userid] of the OpCon user attempting the update was not allowed update authority to this [dsname*]. - Access is denied to this user and the update is not made. - Message XPS122I may precede this message with the name of the JCL member this user was attempting to update.
XPS119E	Tracked/Queued Job: [jobname] Rejected by SAM	- Indicates an attempt was made to track a job that was not defined on in SAM. - The job is ignored by OpCon. - All dynamically tracked jobs must have a corresponding entry in SAM.
XPS120I	READ \| SAVE \| EDIT Error	- Indicates a requested JCL update has failed. - This message is displayed in a Enterprise Manager Message Box only on the user workstation. - Additional information is available in the MVS SYSLOG. - Retry the request. - If the reason for this error cannot be determined contact SMA support.
XPS121E	TCP/IP Error	- Indicates a communication error has occurred. - This message is displayed in a Enterprise Manager Message Box only on the user workstation. - Additional information is available in the MVS SYSLOG. - Retry the request. - If the reason for this error cannot be determined, contact SMA support.
XPS122I	[Userid] is Updating JCL: [membername] in [ddname]	- Indicates OpCon Enterprise Manager Window access updates to production JCL libraries. - This message is displayed on the MVS SYSLOG in an audit trail.
XPS123I	OpCon Sysplex Manager Active [versionid]	- Indicates Sysplex Management has been initialized. - This message is displayed by XPSPLEX.
XPS124W	[qname] Queue is 80% Utilized - Contact SysProg	- Indicates that the memory queue [qname] may need to be enlarged using the SETQUES= parameter in the XPSPRMnn library member. - If this message persists or the reason for this message cannot be determined, contact SMA support.
XPS125I	WTOX=ON, SMFX=ON SUBSYS=(SYS, TSO, STC, JES2,…)	- This is a response to a "D,EXITS" operator command. - The status of the z/OS LSAM tracking and trigger exits is displayed. - If the contents of this message are different from that shown here, contact the Systems Programmer or SMA support.
XPS126E	Execution Tracking Error: [jobinfo]	- Indicates a failure occurred in the SAPI module XPSTATUS while trying to determine the status of a job that appears to have been removed from JES during execution. - If the reason for this error cannot be determined, contact SMA support.
XPS127E	Checkpoint Tracking Error: [jobinfo]	- Indicates a failure occurred in the SAPI module XPSTATUS while trying to determine the status of a job that appears to have been removed from JES during execution. - If the reason for this error cannot be determined, contact SMA support.
XPS128E	IP Recv Error: [errorinfo]	- Indicates a failure occurred in the TCP/IP server module XPSERVER. - An IP record was received on the OpCon Port that had no valid header information and had a non-zero length. - If the reason for this error cannot be determined, contact SMA support.
XPS196C	Invalid Reply	- Indicates an invalid reply was issued in response the XPS110A message. - Only "Y" or "N" is accepted.
XPS275I	EXPIRING: [dsnmask \| message pattern]	- Because it has not been referenced in 45 days, the dataset or message entry is being removed from the monitor table.
XPS80xi	Messages	- Displays User Exit issues or status. - The x digit refers to the exit number (1 – 9). - The 'I' information character refers to the typical Action/Information Indicator.
XPS80xI	Submit Exit [exitname] Active	- Indicates the first time a user exit is invoked in normal processing. - The activation of that exit is noted on the console.
XPS80xI	User Exit [exitname] Reset	- This is a response to an operator command (F agent,REPUSERx) or to an internal error in User Exit #n. - The exit has been reset for reload. It is reloaded and refreshed at the next normal exit call.
XPS80xE	Invalid Return Code From User Exit	- Indicates the exit x has returned a value other than that allowed. - The exit may be deactivated and the current job canceled. - Valid return codes for each XPS390 user exit is outlined in the XPUSERnn member of hilevel.midlevel.INSTLIB. - Valid return codes are multiples of four starting with zero (e.g., 00, 04, 08, 12…).
XPS80xE	Load Failed For XPUSERnn	- Indicates the exit referred to by XPUSERnn is not in the //STEPLIB concatenation of the OPCON Proc. - Replace and try again.
XPS600I	REPLY TO nn IS; [reply]	- Indicates the reply referenced (nn) was issued by the LSAM as directed by a WTO Table Event entry. - This message is issued by the OpCon z/OS LSAM Automated Response feature. - This is the OpCon LSAM echo of the IBM IEE600I message. Refer to IEE600I for details. - XPS700I REPLY nn IGNORED; REPLY TOO LONG FOR REQUESTOR
XPS999I	Batch Job Statistics:	- Displays an informational set of job execution messages provided by OpCon exit XPSACTRT. - Although the exit is installed by OpCon, all batch jobs, whether or not they are scheduled, receives these messages if the STEPMSGS=Y option is coded in XPSPRMxx.
XPSI499E	ISPLINK BLDL/FETCH FAILED	- Indicates the OpCon ISPF table editor was unable to load the ISPLINK module.

Configuration Options

Setting	What It Does	Default	Notes
XPS	The product identifier	—	—
nnn	The message reference number	—	—

FAQs

Q: Where do Operations Machine Messages appear in the OpCon interfaces?

These status messages appear in the 20-character string that follows the OpCon job status in Schedule Operations within the graphical interfaces. Each agent platform returns different messages while a job is running and when it completes.

Q: Which agent platforms have machine messages documented in this reference?

This reference covers machine messages for IBM i, MCP, OS 2200 (jobs, LMAM, JORS, and XFRTCP), SAP BW, SAP R/3 and CRM, Tuxedo ART, UNIX, Windows, and z/OS LSAMs.

Q: Where can you find file transfer-specific machine messages?

File transfer status messages are documented separately in the Operations File Transfer Messages reference topic.

Glossary

JORS (Job Output Retrieval System): The system used to retrieve and display job output — logs and reports — from agent machines directly within the OpCon graphical interfaces.

DSN (Data Source Name): An ODBC connection identifier that stores database connection parameters. OpCon utilities use system DSNs to connect to the OpCon SQL Server database.

SMANetCom (SMA Network Communications Module): Handles TCP/IP communication of platform-specific automation information between SAM and all agents. Uses database tables to maintain reliable communication and data integrity.

SAM (Schedule Activity Monitor): The logical processor for OpCon workflow automation. SAM monitors schedule and job start times, dependencies, and user commands to determine job execution timing, and processes OpCon events.

LSAM (Local Schedule Activity Monitor): An agent installed on a target platform that runs jobs in the native language of that platform and communicates results back to SAM via SMANetCom over TCP/IP.

Enterprise Manager (EM): OpCon's rich client graphical user interface for Windows and Linux, used to define schedules and jobs, manage automation data, and perform operational tasks.

Department: An organizational grouping in OpCon used to assign jobs to logical divisions. User roles can be scoped to specific departments, controlling which jobs a user can manage.

Token (Global Property): A named value stored in the OpCon database, referenced in job definitions and events using [[PropertyName]] syntax. Tokens pass dynamic values — such as dates, file paths, or counts — into automation workflows.

Operations Machine Messages

What Is It?​

IBM i LSAM Messages​

MCP Machine Messages​

OS 2200 Job Messages​

OS 2200 LSAM Messages Displayed at System Console​

OS 2200 LMAM Messages​

OS 2200 LMAM Messages Displayed at System Console​

BIS Machine Messages​

OS 2200 JORS Messages Displayed at System Console​

OS 2200 XFRTCP Messages Displayed at System Console​

SAP BW Machine Messages​

SAP BW agent Specific Exit Conditions​

SAP R/3 and CRM Machine Messages​

SAP R/3 and CRM agent-Specific Exit Conditions​

SAP BAPI Errors​

Tuxedo ART Job Messages​

UNIX LSAM Messages​

UNIX LSAM Exit Codes​

Exit Code Breakdown​

Unix LSAM Specific Error Codes​

UNIX File Arrival Exit Codes​

Windows Machine Messages​

Windows File Arrival Exit Codes​

z/OS Machine Messages​

Message Syntax​

Messages Displayed on the MVS SYSLOG by XPR390​

Messages Displayed on the MVS SYSLOG by XPS390​

Configuration Options​

FAQs​

Glossary​

What Is It?

IBM i LSAM Messages

MCP Machine Messages

OS 2200 Job Messages

OS 2200 LSAM Messages Displayed at System Console

OS 2200 LMAM Messages

OS 2200 LMAM Messages Displayed at System Console

BIS Machine Messages

OS 2200 JORS Messages Displayed at System Console

OS 2200 XFRTCP Messages Displayed at System Console

SAP BW Machine Messages

SAP BW agent Specific Exit Conditions

SAP R/3 and CRM Machine Messages

SAP R/3 and CRM agent-Specific Exit Conditions

SAP BAPI Errors

Tuxedo ART Job Messages

UNIX LSAM Messages

UNIX LSAM Exit Codes

Exit Code Breakdown

Unix LSAM Specific Error Codes

UNIX File Arrival Exit Codes

Windows Machine Messages

Windows File Arrival Exit Codes

z/OS Machine Messages

Message Syntax

Messages Displayed on the MVS SYSLOG by XPR390

Messages Displayed on the MVS SYSLOG by XPS390

Configuration Options

FAQs

Glossary